Av8r_Sed

Contributing Member
 View profile  See their activity

  • Content count

    308

  • Joined

  • Last visited


Everything posted by Av8r_Sed



  1. Av8r_Sed added a post in a topic Wanted, Spinner for a IVO prop   

    Leni, did you give up on the spinner after that, or just religiously use the loctite?
    • 0


  2. Av8r_Sed added a post in a topic Wanted, Spinner for a IVO prop   

    Ultralight or medium? Two or three blade? I've got a UHS fiberglass spinner available, trimmed for a two blade medium IVO.
    • 0


  3. Av8r_Sed added a post in a topic Maule Tailwheel - Exploded View and Parts List   

    Thanks for the parts list, Doug. For some reason my Maule installation is charmed and I haven't had any real issues with it. I know there are better options, but it ain't broke and I guess I'm not going to fix it... Now I've just cursed myself.
    • 1


  4. Av8r_Sed added a post in a topic Looking for a good place to buy Aluminum   

    You could try either onlinemetals.com or speedymetals.com if you want it shipped. If you get to Sioux Falls or Sioux City you should be able to find a steel supplier who will work with you.
    • 0


  5. Av8r_Sed added a post in a topic CONTRIBUTIONS TO KEEP SITE GOING   

    Thanks for the reminder, Ron.  A few more bux on their way to AK now.
    • 1


  6. Av8r_Sed added a post in a topic 582 Exhaust   

    I'm not sure if it helps, but here are pics of my elbow / exhaust as installed.
     
     
    • 0


  7. Av8r_Sed added a post in a topic First flight as a KC-10 Crewmember   

    Thanks for the pics, Joey.  That's some awesome scenery to backdrop all that airpower.  You may have another career doing air to air photography once you retire.
    • 0


  8. Av8r_Sed added a post in a topic 582 Exhaust   

    TJay, the normal 582 Kitfox exhaust is specially modified to fit inside the cowling.  I believe a standard Rotax exhaust would need modification or you'll need to do a fair amount of cowling work to mount it.  So it's best to look for one off of a Kitfox.
    • 0


  9. Av8r_Sed added a post in a topic Broke 100 hrs in the log book tonight   

    We'll assume the Kitfox kit includes the full Model IV mixer assembly, control arms and some weld-in plates.  In any case, in my opinion, it's not a worthy investment on a Model III.
     
     
    • 0


  10. Av8r_Sed added a post in a topic Broke 100 hrs in the log book tonight   

    OK, I've got it now, thanks!   At $2,195, unless it can magically turn my KFIII into a IV, I think I'll continue to use my feet.
    • 1


  11. Av8r_Sed added a post in a topic Broke 100 hrs in the log book tonight   

    Ed, What is this kit you mention?  I just rechecked their catalog and found nada.  Would it be applicable to just Model I, or any Model I - III?
    • 0


  12. Av8r_Sed added a post in a topic Those of you with dual wing tanks, lets talk plumbing to the header?   

    A lot of early Kitfoxes did have a small (1 gallon or so) aluminum header tank mounted behind the dash to go with wing tanks.  It did have a vent connection, but only used with a manual valve to purge air from the system.  It didn't work so well and resulted in the factory coming up with the poly behind seat header.  I'm pretty sure there was a service bulletin put out pretty much mandating replacement.
    • 0


  13. Av8r_Sed added a post in a topic *&%^#$@ radio !   

    Most noise canceling in your transmission comes from the microphone design.  There are usually two ports - one on the front of the mic and one on the back.  In theory, it should cancel out everything except your voice.
     
    What headsets are you trying?  You might be able to borrow a known quiet headset and give it a try.  Also, keep the mic adjusted right next to your lower lip.
    • 0


  14. Av8r_Sed added a post in a topic Classic IV Restoration   

    Does the thermostat have a weep hole to give some circulation when it's closed? I'm trying to understand how it will function with the long dead leg to heat in order to open.
    • 0


  15. Av8r_Sed added a post in a topic Classic IV Restoration   

    I've never seen a fuel shutoff mounted on the panel.  Good out of the box thinking!  Out to make flow checks a bit easier.
     
    Also, excuse my ignorance, but how do you powdercoat over powdercoat?
    • 0


  16. Av8r_Sed added a post in a topic Rib Stitching (wings and tail)   

    Per the builder's manual of the time, neither are stitched on mine and no issues.
    • 0


  17. Av8r_Sed added a post in a topic Kitfox M-III Prop Comparisons for 582   

    My guess is your GSC is a 66" if it came with the kit.  You'll probably be a bit underpropped.  How about contacting GSC to get their opinion?
     
    http://www.ultralightprops.com/contact.htm
    • 0


  18. Av8r_Sed added a post in a topic FAA considering ALLOWING 2nd PILOT for PHASE 1 TESTS   

    The additional pilot program is already in effect.  Please see the following article:  http://www.eaa.org/en/eaa/eaa-news-and-aviation-news/eaa/2014-10-09-teaming-up-for-safety
    • 2


  19. Av8r_Sed added a post in a topic 2014 High Sierra Fly-in   

    Thanks for posting this, Joey.  Even though I'm a flatlander I figure I can land smoother than the Maule at 08:10 in the video.  Also, I was happy to see the two-stroke Kitfox in the mix near the end.  Who's plane is that?
    • 0


  20. Av8r_Sed added a post in a topic C box air vent   

    I have the old style vented cap on mine.  When I was trying to balance the prop I replaced it with a threaded plug modified to mount an accelerometer.  With the plugged vent, it did leak some oil out the rear seal.  I've had no leakage after returning to the vented cap.
     
    Just checking, but you're only filling the gear oil to the lower of the two witness holes, correct?  When filled correctly the gearbox only is about 1/4 to 1/3 full of oil.
    • 0


  21. Av8r_Sed added a post in a topic Oshkosh 2014 Picture thread   

    Nice collection of pics, Joey.  Thanks for posting them.  As others have said, after you've been to a bunch of them you tend to forget to take pictures anymore.  You sure got around and captured the essence of Oshkosh.  Thanks!
    • 0


  22. Av8r_Sed added a post in a topic Help your fellow men   

    Hilarious! I had a "Heather" that fit into that group along with Tiffany.  I passed this on to my son who's heading off to college in a couple of weeks.
    • 0


  23. Av8r_Sed added a post in a topic Kitfox E brake pedals   

    Strange, but i didn't see anything I had to have.  First time that's ever happened to me.  Pleasure meeting you too!
    • 0


  24. Av8r_Sed added a post in a topic Kitfox E brake pedals   

    Thanks High Country!  Got 'em.
    • 0


  25. Av8r_Sed added a post in a topic Earth X Battery Warning!!!   

    HighCountry,
    I'm glad the meltdown ended up as an inconvenience instead of an incident.  EarthX claims to use Lithium Iron Phosphate (LiFePO4) cells to make their battery pack which are known to be the safest Lithium technology.  These cells shouldn't exhibit this behavior, so it would be helpful for others on the forum to hear how EarthX can explain the event.  The only thing I see from their website is a maximum of 15 V should be applied from the charging circuit.  Maybe if you have a Rotax regulator, it isn't a good match for the battery pack.  In short, I'm curious what went wrong.
    • 0