horsepower
Contributing Member-
Content count
338 -
Joined
-
Last visited
Everything posted by horsepower
-
horsepower added a post in a topic Wanting to build a baggage area under turtle deck
I did one kind of like this Joey,My Skyraider is a tandem so its not very wide but it is right behind the back seat.I made it out of upholstery material and it is held in by Velcro and snaps.I put a piece of cardboard in the bottom to kind of form it square.I put a first aid kit and a little tool pouch back there.Randy
-
0
-
-
horsepower added a post in a topic Prop Problems
You probably need to adjust your cable to let the slide drop deeper into your jet.I adjusted my cable to idle at 1800 and then turned up the idle screws to get my 2000 idle rpm so slide is not hanging off of cables at an idle.Make sure and sync them the same.Randy
-
0
-
-
horsepower added a post in a topic Nice MKIV for sale in Eastern WA
My Skyraider wings look like that when it reflects from the ground,Its just a Illusion because of the undercambered wing.Its a nice looking plane and good buy.Cost a lot more to build one for that.Randy
-
0
-
-
horsepower added a post in a topic Enigine to Ground straps
My Battery is mounted on the firewall on my Skyraider so I ran a ground directly to the starter and from there directly to the solonoid base and another one to one of the housing bolts.Im a firm believer in plenty of grounds,a bad ground can cause other problems.Randy
-
0
-
-
horsepower added a post in a topic Help?
I think with all the crap that's on the daily news we're much better off watching some of the old comedies and action shows.Kit the car was pretty bad ass.Ive been watching " I love Lucy" before I head to work in the morning. Alf was actually a funny show,wish it was still on.Randy
-
1
-
-
horsepower added a post in a topic Going Ivo IFA
Nice going Joey,What kind of cruise speed do you have now and what are your climbout RPMs.Im assuming you didn't pickup 15 MPH over your old prop but is it going to make your Idaho trip a little more forgiving?Randy
-
0
-
-
horsepower added a post in a topic AVID Flyer Airworthiness Directives
I think the kit planes have AD,s they made me write down the most current bi-weekly when I had mine inspected.I think they want to see if there is any new issues of your model of plane before they give it a airworthiness certificate.Randy
-
0
-
-
horsepower added a post in a topic AVID Flyer Airworthiness Directives
The most current AD # is 2013-03 but next week it would change again. The last AD was from 1/28/2013 - 2/10/2013.On your form I would just write down 2013-03 and you should be good.Randy
-
0
-
-
horsepower added a post in a topic DAR Inspector
When I got my Skyraider inspected the DAR told me that I needed a material list of everything that went into the build,unless the kit manufacturer had been assigned as a qualified kit builder.This went into effect in 2009.Luckly I had already purchased my kit prior to 2009.Skyraider says they are on the FAA list now.It has something to do with the 51 percent rule so if your kit is not on the list then you have to prove that you built more than half of the airplane.Bunch of more crap we have to deal with.Good Luck Randy
-
0
-
-
horsepower added a topic in Hangar Talk
Picture says it allI saw a news reporter yesterday on Fox news trying to interview Bloomburg on why he has so many bodyguards with weapons and why no one else in the city are allowed to have a handgun for their personal protection.Bloomburg said he would get back with him later on this subject.What a dick.........
- 7 replies
- 1,648 views
-
horsepower added a post in a topic FUEL MIXTURES and CRANKCASE OIL- 4 CYCLE
Your buddies right about the Zinc not being in our oils anymore.Thats what keeps camshafts from going flat when breaking in a new automobile engine.Shell Rotella supposedly still has zinc but dont know for how long.Marvel mystery oil is good stuff.We mix one gallon of mineral spirits to 1/4 cup of Marvel,paint it on our drag tires and it softens them up and makes for better traction.It also can be used on old car tires that have dried out.We use Valvoline race oil for our drag motors,lots of zinc in it.I friend told me if a can of oil doesnt have the energy conserving logo on it then it probably still has zinc........Randy
-
0
-
-
horsepower added a topic in Jokes
Long live redheads...Obama was looking for a Call Girl
He found 3 such girls in a local Pub,a blonde, a brunette and a redhead.
To the blonde he said,I am the President of the United States,now how much would it cost to spend some time with you?
She replied $200.00,to the brunette he ask the same question.Her reply was $100.00
He then ask the redhead... Her reply was,
Mr. President,if you can get my skirt up as high as my taxes,my panties as low as my wages,Get that thing of yours as hard as the times we are living in,And keep it rising like the
price of gas,Keep me warmer than it is in my Apartment and screw me the way you have retirees,
Then you can have it for free,like the immigrants.
- 1 reply
- 1,231 views
-
horsepower added a post in a topic Elt - save life?
If your plane has not been inspected yet for a air worthiness then you have to have the new style with the remote control,it can still be 121.5.If it already has a airworthiness from a few years back then you can use the older style without the remote control.There is no rules as where you mount it but most mount behind seat.If you have a single place a elt is not required.I guess if you go down by yourself nobody cares.Randy
-
0
-
-
horsepower added a post in a topic Maybe new Political category needed here
As American citizens we are supposed to obey the laws that are set in place under our constitution,not by a bunch of pick and chose liberals that has forgot how we have retained our freedoms.Doesnt surprise me from a State that is banning oversized soft drinks.New York is the lawbreaker so hang tough with your rights.They will walk all over us and it will spread like wild fire..........
-
0
-
-
horsepower added a topic in Jokes
-
horsepower added a post in a topic Facts...
Good video,your right you'll never see that in main stream media.They fabricate their own statistics thinking that we are a bunch of idiots.All I have to say is my small town has a almost non existant violent crime rate because just about everyone has a .45 or hunting rifle ready to go at all times.2nd amendement works well here.Randy
-
0
-
-
horsepower added a post in a topic Rotax 582 Grey Head Coolant
Same here,I use Dexcool orange with distilled water.It is supposedly alot easier on the waterpump shaft with the less silicone content.........
-
0
-
-
horsepower added a post in a topic WTF?
Just a Vegas hangover.............
-
0
-
-
horsepower added a post in a topic bing 54 carb vent lines
Its a Super Skyraider 2 with dual controls......
-
0
-
-
horsepower added a post in a topic bing 54 carb vent lines
I bought my engine used and when I primed it up for the first time both carbs leaked out the vents.Pulled carbs apart and both looked spotless.Put them back together and same thing both leaked.I ordered two carb kits and it solved problem on both carbs.The old needles were hard so probably dried out from sitting.I set my carbs with a straight edge same angle as cylinder head.Randy
-
0
-
-
horsepower added a post in a topic clicking noise rotax 582
Hope its normal cause mine does the same thing, its got 150 hrs since rebuild and no issues.Randy
-
0
-
-
horsepower added a post in a topic Idaho Backcountry 2012 trip report
Those are some nice Mulies and the Elk isn't too shabby either.Nice hunt.Randy
-
0
-
-
horsepower added a post in a topic joke thread
I bout spit coffee out my nose on this one,Larrys joke also, gonna send these to my mother in law.She'll be laughing for a week! Randy
-
0
-
-
horsepower added a post in a topic 3 piece windshield
I've tried a lot of different things on my racecar to stop the cracking around the screw holes on my side windows.The thing that has worked best was oversize the hole in the lexan and the tabs that they attach to. Use a screw with lock nuts and just barely snug them down.Polycarbonate has to be able to move with expansion.Not sure if this would work for Leni at 30 below but it stopped all my cracking and crazing around the screw holes.Dont use Loctite on the screws,it will cause Lexan to craze and crack.Drill with dishsoap and drill slow,then clean the sharp edges off with a file or tapered mill.Randy
-
0
-
-
horsepower added a post in a topic Contributing Membership??
Its totally worth it for me,theres a butt load of info on this site and its been helpful.Randy
-
0
-