TJay
Contributing Member-
Content count
1,919 -
Joined
-
Last visited
Everything posted by TJay
-
TJay added a topic in Avid fox flyers pics and vids
-
TJay added a post in a topic Kasilof River ski flying
Pretty fun
-
0
-
-
TJay added a topic in Jokes
-
TJay added a post in a topic Kitfox crash on utube
Not cool but glad he is alive.
Had to be showing off because every time I even get close to a power on stall I think to myself how can somebody get to this angle and not realize it.
-
1
-
-
TJay added a post in a topic 109JB has another project
I would love to do a composite aircraft nice find.
-
0
-
-
TJay added a post in a topic Luga NR prop selection
Are you Juicing up the Kitfox?
-
0
-
-
TJay added a post in a topic Upright engine rubber motor mounts
Denis Carley in Florida probably has them They look just like the challenger engine mounts.
-
0
-
-
TJay added a post in a topic Lexan for widscreen and doors
I used grey .060 lexan for everything from Wicks Aircraft I think it looks nice.
-
0
-
-
TJay added a post in a topic Luga NR prop selection
3000rpm is where my engine loves to be and that gives 80mph indicated airspeed. I have tried lower rpm for cruise but it runs smoothest at 3000 and makes good power there. Seems like every plane and engine tells you where it wants to be.
-
1
-
-
TJay added a post in a topic Luga NR prop selection
Ha I think he is busy busy I believe he likes it when you tell him what you want send the money and sit back and wait.
-
0
-
-
TJay added a post in a topic Luga NR prop selection
I did and mine is way better at higher rpm but i did lose 8mph doing that. Mine would never hit 100 with this setup 90mph tops. The first time I set mine up I was way over pitched it did 100 then but climb was poor and I noticed it was hard to slow it down on landing.
-
0
-
-
TJay added a post in a topic Luga NR prop selection
I also run mine with the high rpm. Flat and level I can reach 3600 RPM. Climb is pulling exactly 3300 RPM
-
0
-
-
TJay added a post in a topic Luga NR prop selection
When I first installed mine I was a bit nervous because I thought there should be spacers between those hubs for the bolts to go through but in 100hrs it is still doing great. Enjoy.
-
1
-
-
TJay added a post in a topic Luga NR prop selection
oh boy your gonna love how smooth it is. I'm excited to hear the difference between your warp drive vs luga. All i had to compare was an old wooden prop and that was a night and day difference.
-
0
-
-
TJay added a post in a topic Laying Tracks
Those are really awesome pictures. Looks like lots of fun.
-
0
-
-
TJay added a post in a topic Rebuild wing for JetFox 91D aircraft
The ply wood on the front of the rear spar is usually 3/16 10ply and the ply wood behind the rear spar is usually 1/4 12ply.
-
0
-
-
TJay added a post in a topic Tube diameter for 912 mount
Hope this helps.
-
0
-
-
TJay added a post in a topic Tube diameter for 912 mount
Hey Ill run to the hanger right now and get some measurements If I dont make it back tonight ill get them to you tomorrow. I have been fighting with kidney stones for the last couple days so Im a bit on the slow side.
-
0
-
-
TJay added a post in a topic Tube diameter for 912 mount
I have them Do you need measurements?
-
0
-
-
TJay added a post in a topic Hauling a 912 rotax in Kitfox 4
well if it don't fit how bout the rear seat of the champ? Or do you have a chief?
-
0
-
-
TJay added a post in a topic Hauling a 912 rotax in Kitfox 4
Could you hang it on the underside of the airplane?
-
0
-
-
TJay added a topic in Hangar Talk
-
TJay added a post in a topic Minnesota "Skiplaning"
awesome guys looks like lots of fun
-
1
-
-
TJay added a post in a topic Hello from Connecticut
Never mind that is a shadow that I see thought it was a leading edge tape.
-
0
-
-
TJay added a post in a topic Hello from Connecticut
Very nice and I see the propeller spins the right way. Does it have a belt drive in it or something?
-
0
-