Klmt101

Members
 View profile  See their activity

  • Content count

    26

  • Joined

  • Last visited


Everything posted by Klmt101



  1. Klmt101 added a topic in Avidfoxflyers General Hangar   

    Getting ready to start fabric
    The horizontal stabalizer fixed, com transponder ELT and gps antenna brackets made and welded in waiting on some drain grommets rudder cables and new hardware.
    what are some of the thing you guys wished you had done prior to fabric on the fuselage?
    very impressed with the oratex did a small picture frame to test the glue all seams to be okay, it is water based and delivers during sub 20 degree weather and can’t freeze. Wish they put a temp tattle take in box for piece of mind.
    • 4 replies
    • 636 views


  2. Klmt101 added a topic in Avidfoxflyers General Hangar   

    Position lights and elt?
    What is everybody using? For position and anti collision light wanting to stay led. And elt. Don’t plan on much night flight but while fabric is off might as well.
    • 1 reply
    • 413 views


  3. Klmt101 added a post in a topic Broken tube repair sugestions   

    Great video, ordered everything materials Friday. No internal rust just at the crack. Plane has been outside for a year now. Probally better pull fabric on horizontal next.
    • 0


  4. Klmt101 added a topic in Kitfox IV   

    Broken tube repair sugestions
    Any good ideas on how to fix this tube. Broken behind rear elevator monting tab.



    • 7 replies
    • 942 views


  5. Klmt101 added a post in a topic What do these pictures tell you?   

    Can somebody measure the lower longerons deflection at the tubbing cluster in between 24 an 85 inches forward of the tail spring bolt. Dont see anything that looks wrong or a repair.


    • 0


  6. Klmt101 added a post in a topic Flying from home in class d airspace?   

    Thanks man that picture is alot better than mine. Thats lind of what I was thinking and after a few rounds the tower instructors will have it figures out. Radios and follow normal trafic pattern procedure hopfully its not a problem. Saves alot of time and money being able to keep these things at home.
    • 1


  7. Klmt101 added a topic in Avidfoxflyers General Hangar   

    Flying from home in class d airspace?
    I have a pasture behind the house id like to fly out of its 350 by 1300. Problem is center of the field is .9 miles from reference point of KLMT. Under class D airspace. Field is controlled 7am to 5pm, the tower is a training spot. Anybody have experience or ideas before talking to the tower guys? Red dot is the field.

    • 3 replies
    • 378 views


  8. Klmt101 added a post in a topic Looking for model 4 seat pan.   

    Thanks everybody for looking finally found found the original one.
    • 0


  9. Klmt101 added a post in a topic Looking for model 4 seat pan.   

    Fastnel the bolt suplier is always willing to ship pallets also, not sure on pices though.
    • 0


  10. Klmt101 added a post in a topic Looking for model 4 seat pan.   

    Well where are you at, im in southern Oregon
    • 0


  11. Klmt101 added a topic in For Sale and wanted, you got it, I want it   

    Looking for model 4 seat pan.
    Bought a project missing seat pan I'm sure other things are missing also just havent found them.
    Kurt 5412816702
    • 9 replies
    • 772 views


  12. Klmt101 added a post in a topic What do these pictures tell you?   



  13. Klmt101 added a post in a topic What do these pictures tell you?   

    While the fabric is off the fusalage what esle should be done? Not interested in a you tube monster just a nice clean airplane to play with. How much wider is a 4 vs 2. The model 2 I owned was just too much of a project for me, sold it with a lot of work to be done still, I would almost consider it a one person plane. Hal has been through the engine in the past couple months it is missing the seat pan along with some misc that I'll find along the way.
    • 0


  14. Klmt101 added a post in a topic What do these pictures tell you?   

    Dusty what told you it was a 1200, I'm still learning here. Getting it registered is my biggest fear it was purchased throught an estate sale. Regarding the rudder peddle reinforcment what is the best way to do it bot saying kitfox ad is bad but somebody might have figurwd out something better
    • 0


  15. Klmt101 added a topic in Kitfox IV   

    What do these pictures tell you?
    300 or so hours 80 up ul. Really don't know anything else about it before going to look at it.






    • 9 replies
    • 1,612 views


  16. Klmt101 added a topic in For Sale and wanted, you got it, I want it   

    Fox 1 project for sale, Oregon.
     
    This is a project. Currently the wings are uncovered. It has Al wing tanks in both sides. Fuselage is straight. No damage history. No corrosion, it's lived in northern CA and Or. 950 gross weight. Has homemade trailer. 582 firewall forward.
    Still having issues with pictures, there is a bunch in kitfox 1 section titled bringing it home to oregon. Selling because I would rather fly than build one.
    Located KLMT call Kurt 5412816702 leave a message if no answer out of service regularly.
    • 1 reply
    • 650 views


  17. Klmt101 added a post in a topic Finally brought it home, more photos in the morning.   

    Sorry to dissapoint everybody, I made a deal on a 140 yesterday. So its on the chopping block. Also have a phazer sled to go with it.
    • 2


  18. Klmt101 added a post in a topic Finally brought it home, more photos in the morning.   

    So I have realized that I am not an airplane builder, just not enjoying it like I thought. So I have decided to sell this project. And find a complete aircraft. Should any of you guys be interested let me know. What specific pictures, information, and paper work would make a complete advertisement for a great add? 
    Picture is the start of building runway at the farm.
    • 0


  19. Klmt101 added a post in a topic Finally brought it home, more photos in the morning.   

    Have all the flaperon hangers cut bent and drilled, ordered hysol a few minutes ago. Going to try acetone in the morning for fabric removal. Should I worry if and when I get it on a epoxied joint?
    • 0


  20. Klmt101 added a post in a topic Finally brought it home, more photos in the morning.   

    Thank you, just picked up a gallon of acetone from town. Al foe flaperon hangers came in today so going to spend the evening in the metal shop. Is there a better epoxy to use for re ataching false rib than whats in the build book
    • 0


  21. Klmt101 added a post in a topic Finally brought it home, more photos in the morning.   

    Progess has been non existent the past couple weeks. Have had zero luck finding replacment 6 gal tanks, calles Kitfox a couple times now and havent heard back yet on price and wait time, spent a little time removing right wing and pulling fabric off the other. Found 3 broken false ribs, one because of me. What chemical will remove glued fabric without harming rib glue or rib varnish? Second picture is the one I broke, it has already been spliced at one point along with three others spread out along the wing. 4th picture is broken and warped have yet to find the broken piece. Removed 15 or so mud daubber nests.




    • 0


  22. Klmt101 added a post in a topic Bush gear topic reopened   

    Thats it.
    • 0


  23. Klmt101 added a post in a topic Bush gear topic reopened   

    I understand what your after now, was at Reno today and seen a yellow fox with a cabane added and it finally clicked how they are doing it without modifying fuselage. Front gear mounts have an additional piece sandwiching outside of mount that the cabane is welded too. Plane was equiped with dual springs basically replacing the bungies.
    • 0


  24. Klmt101 added a post in a topic Bush gear topic reopened   

    Will instead of redesign completly what about triangulating top of cabane to help with stress on longerons and adding the shocks next to the bungies? 
    • 0


  25. Klmt101 added a post in a topic Softened plastic fuel tank   

    Please keep us uptaded, left a voice mail with him yesterday asking about new tanks. 
    • 0