lift struts

[snaprollinfool 1]

Hi, does anyone know the wall thickness of the 7/8 inch lift struts?

[nlappos 413]

Here is the info I used for replacing the struts on my Avid Mk IV. I used the .47" struts. I had to cut the rod shorter by about 1" and rethread the end fitting, probably because I didn't measure the length properly!

https://www.mcmaster.com/catalog/130/1496/9416K12

 

Edited 26 February by nlappos

[TJay 1041]

on the kitfox they are .049

[snaprollinfool 1]

on the kitfox they are .049

thanks tjay