Posted 16 Oct 2019 Where can I order Bungee cords for my landing gear. C model HH Thanks !! Share this post Link to post Share on other sites
Posted 16 Oct 2019 I've bought the 3/8" shock cord from aircraft spruce and made my own. Part # 06-12400. I used safety wire to tie the loops. JImChuk 1 person likes this Share this post Link to post Share on other sites
Posted 16 Oct 2019 (edited) Here you'll find most of what you need, length, dimensions,Aircraft spruce references, how to make them etc. And I should add there are also other posts on this topic (and yes, mine is a model C, HH as well) Edited 16 Oct 2019 by FredStork 1 person likes this Share this post Link to post Share on other sites
Posted 17 Oct 2019 Thanks to all that are helping me get going with this project. I had an Avid that I rebuilt about 21 years ago when Airdale was around and I was 54 instead of 75. I had other Airplanes in between. I just need to get up to speed on where to get parts and how to navigate around this site. Jim Chuk has been very helpful. Thanks Fred for the Bungee post. 1 person likes this Share this post Link to post Share on other sites