Stuck Ignition/Starter Switch (Keyed)

[LSaupe 123]

My start switch (keyed) is stock in the ON position.  Before I try to cut off the key (in order to get this off) is there another way to break this free (pull out the barrel etc)?

It is a 3 position, 5 pin switch (OFF, ON and START).

You can just see it in the upper left portion of the image below.  Just a basic key switch, as supplied in the original KitfoxIII kit.

]

 

 

 

[TJay 1041]

i would first try to shoot some wd-40 in her maybe that will break it free

[Av8r3400 1179]

x2 with pen oil to try. 

If that doesn't work cut/break off the key, remove the switch and stake it to you friendly neighborhood NAPA store for a $10 replacement. 

Edited 26 Oct 2015 by Av8r3400

[allonsye 85]

You might try graphite powder.  Usually the preferred method for lubing keyed switches.

[EDMO 1078]

I've got the same switch with a key broken off - I'll take a closer look at it tomorrow.

EDMO