-
Content count
257 -
Joined
-
Last visited
Everything posted by akflyerbob
-
akflyerbob added a post in a topic WTB - Rotax B gear box
Robert
I have one I'm not using.
Sent you a message
Bob
-
0
-
-
akflyerbob added a post in a topic Supereyes borescope
Thanks Doug, called it up and got one ordered.
-
0
-
-
akflyerbob added a topic in Hangar Talk
Supereyes borescopeAwhile back someone posted where this small borescope (endoscope) could be bought.
I bought one and it works great, and I want another for a gift but don't, can't, fins the post.
Can anyone point me to the address?
- 7 replies
- 1,494 views
-
akflyerbob added a post in a topic Merlin GT
If you have a bill of sale from the registered owner
you can do "MAJOR" maintenance and not tell Big Brother a Damn thing
Register with the same N#
OF the people, by the people and for the people
-
0
-
-
akflyerbob added a post in a topic Treetop Landing
Akflyer, You are qualified for a lot of things, but not for a lumberjack
-
1
-
-
akflyerbob added a post in a topic Alaska flyers beware
Flying Wild Alaska was ERA Alaska and is now Ravin Air and is owned by and operated by all the idiots their talking about.
They should have known, when you do stupid stuff and put it on TV, your going to get everyone busted, not just you.
And BTW, she is a babbling idiot!
-
0
-
-
akflyerbob added a post in a topic After years of searching they found the remains of my ex wifes plane
I'm not sure,,, things are blury, but I think I remember riding that thing at Big Lake one night
-
1
-
-
akflyerbob added a post in a topic FWD LH wing spar/fuselage attach holes
Some other folks have had to bend the tube to align and correct this problem
-
0
-
-
akflyerbob added a topic in Hangar Talk
Not Funny
You may have heard on the news about a Southern California last week a man who was put
under 72-hour psychiatric observation when it was found he owned 100 guns
and allegedly had 100,000 rounds of ammunition stored in his home. The house
also featured a secret escape tunnel.
By Southern California standards, someone owning 100,000 rounds is considered "mentally unstable."
In Michigan, he'd be called "The last white guy still living in Detroit."
In Arizona, he'd be called "an avid gun collector."
In Arkansas, he'd be called "a novice gun collector."
In Utah, he'd be called "moderately well prepared," but they'd probably
reserve judgment until they made sure that he had a corresponding quantity
of stored food."
In Kansas, he'd be "A guy down the road you would want to have for a friend."
In Montana, he'd be called "The neighborhood 'Go-To' guy."
In Alabama, he'd be called "a likely gubernatorial candidate."
In Georgia, he'd be called "an eligible bachelor."
In North Carolina, Virginia, Mississippi, Tennessee, Kentucky and South Carolina he would be called "a deer hunting buddy."
And in Texas he'd just be "Bubba, who's a little short on ammo."
- 9 replies
- 1,650 views
-
akflyerbob added a post in a topic Finally got my Ivo front plate
I know how you feel.
Between IVO and Aircraft Spruce, they can make you feel raped, plus freight.
-
0
-
-
akflyerbob added a post in a topic New Ohio member
If I remember, about 6 months ago the guy bent his fus trailering with the fus braced
and not setting on the tail wheel. Setting on the tail wheel allows the spring to absorb
some bumps passed from the trailer.
I trailer mine to the airport every time I fly and the tail spring really gets used.
Mine is tied down around the wheel/tire and spring. I have a two leaf spring.
For long distance I would also provide something additional to keep the fus aligned with
the trailer in case the spring breaks
-
0
-
-
akflyerbob added a topic in For Sale and wanted, you got it, I want it
WantedLooking for an alum coil mounting plate from a 582 used on Kit Fox
Also looking for an oil pump and RV cover plate some one took off to run mixed gas
Also looking for an RV oil bottle
- 2 replies
- 811 views
-
akflyerbob added a post in a topic Avid Catalina, any set of plans or project available for sale?
Where are you located
I have a rebuild in progress I'm going to sell
-
0
-
-
akflyerbob added a post in a topic Kitfox wheel hubs on ebay
Your not getting that old Leni, but memory, not that's something else again ..
I have bought 2 different sets of wheel/hubs/breaks but from WHO
That's also a memory problem.
But you did get a set from me, proving your not that old.
-
1
-
-
akflyerbob added a post in a topic WTB - I'm looking to take on a project. Kitfox or Avid
It would really help if you would say where you are in your profile......................
-
0
-
-
akflyerbob added a post in a topic WANTED: 72" prop for soob belt reduction pusher
C5
I have two sets of iVO pusher blades
I'll measure them tomorrow and post a pic "maybe" on the pic
-
0
-
-
akflyerbob added a post in a topic WTB Kitfox 3 or 4 wings
I sent you a PM a couple days ago
-
0
-
-
akflyerbob added a post in a topic Parts for sale
I'm not sure about this but I've herd about wipers on a goats ass .. da
I have a speed wing tank on my mod 1 and just filled in on the undercamber
with wood and nobody has ever noticed it
-
1
-
-
akflyerbob added a post in a topic Big Boy Toys
That looks a little beefer than the 114/5/6's we had to play with
-
0
-
-
akflyerbob added a topic in Jokes
-
akflyerbob added a post in a topic rotory valve
A while back I read something on the internet where a guy was using this motor
on a Kitfox or Avid.
Iv'e been trying to find the site to post it for you but as of now haven't found it.
I do remember he was using the carbs from the seadoo.
If I remember, that motor doesn't have a water pump, but uses water pressure from
the jet unit???
-
0
-
-
akflyerbob added a post in a topic Rants
So if your wrapped up in this huge, wet towel,
What color are you now??
-
1
-
-
akflyerbob added a post in a topic machining a prov 8 case
No snow yet .. still in the high 40's
I used a spare mod 90 case to get the measurements for machining the
582 snow machine case front to mount the gearbox after threading the 8 holes
Also, since the snow machine 582 is a single ignition, the rotary oil tube, upper, has
to be rerouted to clear the coil mount plate and oil pump.
I'm not sure the hole process is worth it as you have to have the rest of the parts from a
mod 90/99 to complete the motor anyway
-
0
-
-
akflyerbob added a post in a topic machining a prov 8 case
The front (power end) is not machined to accept the gear box.
I've done several of these cases to the measurements of an original type 90 case
and assembled them but have yet to fly one.
-
0
-
-
akflyerbob added a post in a topic Yahoo Group
Yhaaa, but the grumpyolmen part...really
-
0
-