Dusty

Members
 View profile  See their activity

  • Content count

    325

  • Joined

  • Last visited


Everything posted by Dusty



  1. Dusty added a post in a topic Let's talk gear geometry   

    Rather than repeat my last reply on bush gear failure thread,I add a comment on Spring replacement.it may be of some help?
    • 0


  2. Dusty added a post in a topic Bush gear failures   

    Regarding springs,my choice would be acme aero springs but my budget (read wife) says no way. I am experimenting with eurethane pucks with some success. 2 kg weight saving,no chance of bottoming out and a degree of rebound damping.some more hard testing is required but results are favourable.
    • 0


  3. Dusty added a post in a topic Rotax 582 RaDIATOR CAP Woes   

    The lower radiator pressure was for the early 582's with the non ceramic seal for the water/ rotary seal. Later (blue top) or modified greys are ok with higher pressure.
    • 2


  4. Dusty added a post in a topic ron walker's mohawk   

    My personal experience with the 582 has been exceptional. Reliable easy starting and great power to weight.
    • 0


  5. Dusty added a post in a topic Wider gear options for the IV   

    Shifting the wheels forward can delay the lifting if the tail with the resultant longer take off roll. Nosing over is a skill related problem in a kitfox.
    • 0


  6. Dusty added a post in a topic Kitfox Mk2 wing rebuild   

    I am intrigued as to what the optima wing mod is ?
    • 0


  7. Dusty added a post in a topic Seein how short I can STOL my Kitfox   

    I've posted most of the results of how a kitfox compares to other aircraft. The 701s are all flown by previous competition winners. 
    The airfield is 100ft above sea level. Due to a miscalculation I still had 60 litres of fuel on board.
    • 0


  8. Dusty added a post in a topic Seein how short I can STOL my Kitfox   



  9. Dusty added a post in a topic Rotax 582 mod 17 spark plugs   

    that's the ULS plug. I assumed the 2 strokes would have a totally different heat range. I can't find the reference on that site . I will have another look tomorrow
    • 0


  10. Dusty added a topic in Rotax and other engines   

    Rotax 582 mod 17 spark plugs
    Does anyone have a NGK or Bosch reference number for the 582 mod 17 plugs .Rotax p/n 297656. These are like the 912 type with small thread and double electrodes. These plugs are like trying to find a one ended stick!!
    • 4 replies
    • 1,854 views


  11. Dusty added a post in a topic Seein how short I can STOL my Kitfox   

    Here is my first attempt at a stol competition. I've now got the bug. Kitfox JFA starts about 1.40
    This class was the tightest and I still got 4th among the 701's
    It's interesting to see how all the different aircraft perform and people were surprised how an 80hp heavy kitfox can perform 
    I can post the results in metres if anyone is interested
     
    • 5


  12. Dusty added a post in a topic Windshield/skylight replacement   

    Mine was originally riveted with washers on the capstrips. I epoxied a spruce strip to the back of the capstrip for a good bite for stainless screws. The screen replacement will be easier next time. Don't be tempted to try 1.5 mm lexan as the flexing above 90 kts is a bit disconcerting!
    • 0


  13. Dusty added a post in a topic Cutting loose in New Zealand   

    You're  more polite than some . They say the "F "is something else!
    • 1


  14. Dusty added a topic in Avidfoxflyers General Hangar   

    Cutting loose in New Zealand
    Between covid 19 and bad weather we were going stir crazy. A group of us headed to the West Coast of the South Island for a couple of days of flying.
    VID-20200816-WA0046.mp4
     


    • 2 replies
    • 446 views


  15. Dusty added a post in a topic Rotax 582 power loss diagnosis   

    I had a facet 4 psi on my 582.It was plumbed in line before the pulse pump and gave no trouble. Use a genuine facet not a copy  I used a knockoff on my 912, this one failed internally after a very short time. It was making the right noises but not pumping.
    • 0


  16. Dusty added a post in a topic OSH AirVenture 2020 CANCELLED   

    A bit sad but not unexpected. A group of us from New Zealand got our tickets in November  and even had campers booked. We had better restart our countdown calendars . 
    • 0


  17. Dusty added a post in a topic New guy in Vermont, Ridge Runner rebuild   

    As above but add a regular huff puff bearing test and regular check of your gearbox oil level as "A" &"B" boxes can have their oil sucked into the engine with little warning if the crank seals are suspect
    • 1


  18. Dusty added a post in a topic Brakes   

    Black max do a very nice two lever stick mount master cylinder that would eliminate the poor geometry problems of early avid fox toe brakes. I installed a Black max setup on my Drifter and was impressed with the quality of the components .
    • 0


  19. Dusty added a post in a topic 912 hp increase   

    You may need to upgrade your starter. I my be wrong but check the cam timing as an 80 and a 100 may have different timing. Also an 80 is around 81 hp where a 100 is 97 hp without the air box which won't fit a 4. The gains may be negligible ? I looked in depth at the same issue when my early 80 hp became due for replacement, I can't comment on high DA ,but under 3000ft a 4 is a rocket with an 80!. A zipper kit was on the cards once the warranty had run but looking at how well the 80 goes I am going to leave well enough alone! At the recent national STOL comps I was out performing most of the 180 hp Cubs on takeoff!
    • 0


  20. Dusty added a post in a topic Fairing/pod for cabane MK IV   

    I fly with a factory kitfox belly pod that is modified for clearance around the cabane gear. There is no noticeable difference in flight charactoristics with or without it other than an earlier softening of the elevator effectiveness in the flare(vg's cured this). Radiator position is an issue as I moved mine forward to get out of the dead air in front of the pod. The cabane gear is a bit more draggy than the std gear as there was a difference with or without the pod on this setup. 
    • 1


  21. Dusty added a post in a topic Fairings, more   

    great article but I don't get the mystery ship logo thing? I can't find anything on the interweb either. Am I missing something?
    • 0


  22. Dusty added a post in a topic Header tank   

    I had never considered running without a vent line but the self venting theory makes a lot of sense. The only real advantage of a vent line is (with a see through line) is to see when the wing tanks are empty and landing should be a priority
    • 0


  23. Dusty added a post in a topic 582 alternate pistons   

    Don't use the single ring Pistons! They make it very hard to do a huff puff test and also don't have the side port. Despite the instructions stating the port isn't necessary, it IS needed. The top bearing will start to fail in less than 200 hours.
    they can supply 2 ring Pistons  which are very good quality,but make sure you use the genuine rotax cageless bearing and pin.
    cheers
    Dusty
    • 1


  24. Dusty added a post in a topic 670 info   

    The ideal 670 won't have a rubber plug at the top of the flywheel housing but will look like a 582 with a bump either side by the case joint
    • 0


  25. Dusty added a post in a topic Skelly flys the kitfox   

    This is taking gross weight reduction to the extreme
    • 1