Posted 8 Jan 2015 Ok here it goes. I would like to double check my self here before I drill through through the bottom of the spars. ok I have the wings square with the fuselage dihedral is set strut attach fittings are hose clamped in place . top of the spars are drilled and pins dropped in. when I set the level next to the fuselage laying on the top of the spars my front spar is 1 1/4" lower, now with 1 degree twist at the wing tips when I set the level on the spars the front spar should be 1 3/4" lower correct? Share this post Link to post Share on other sites
Posted 8 Jan 2015 The reading on the spars near or at the fuselage should be 1.25 and at the very tip rib should be about 1.75 - but don't think the tip measurement is critical as long as both wings are the same. I need a new keyboard so I can do fractions and question marks easier. I think you are correct. EdMO Share this post Link to post Share on other sites
Posted 8 Jan 2015 everything lined up so nice she will be a dream to fly Share this post Link to post Share on other sites