-
Content count
257 -
Joined
-
Last visited
Posts posted by akflyerbob
-
-
I will be needing a pair of brake rotors that are for the old Douglas 8" wheels
I could also use a set of the wheels that have the rotor lugs welded in
-
Are you still looking for the 8" tail wheel? They come with steering arms.
-
I have a new 8" pt # 06-01620, never used
-
The exhaust came from Rotax Rick and wasn't even close to fitting.
I had to turn the down pipe 90 deg, while keeping every thing the same length and diameter
and slightly change the down angle,
I understand he now has an exhaust that is supposed to fit????
In the picture the exhaust is in the cowl
-
-
gunderson sent you a message
-
In the near future I'm going to need a plate mount for a 503.
Anyone out there have one there not going to use?
AKflyerbob
-
- I have both the rear avid catalina and Rotax Rick 618 exh
-
Have you found a 618 exhausy?
I have 2 types for the 618
-
-
I have a snow blower that the blower part is gone.
I would be good for that if a third wheel and pull device were added.
Actually that's what I bought it for. It has 5 forward and 2 reverse speeds, all slow of course
1 person likes this -
The weight of the 618 is the same as the 582.
It will come with an exhaust but it will have to be modified to fit under the cowl.
I do have an exhaust supplied by Rick, built by some exhaust builder that also has to be modified
to fit in the cowl. Some mistake between Rick and builder, not backed by either but was $500.
Avid used the 618 for the Catalina so the stock exhaust is the rear exhaust.
-
I want $2500 for the 0 time motor + shipping
and $1000 for the other + shipping
When I shipped to Rotax Rick it was @ $300
-
Napa has them
-
Anybody interested in a new, only run in, 618
I also have a used, @ 200 hrs, 618. Been sitting for @ 8 yrs.
-
Larson / Speardon bay Kodiak Island, Alaska
-
-
I have an exhaust off a blue head motor I bought that had been in an Avid.
According to the guy I got it from the motor only had 90 hrs on it.
PM if interested
Bob
-
-
The mod 2 and 3 doors are different from the mod 1.
The mod 1 has an extra angle at the bottom the 2/3 doesn't have.
Don't know about avid doors tho.
Bob
-
I need a RV oil bottle if you part with it.
-
You guys quitit .. you are pissing off the guys that can't go ... ME
1 person likes this -
Now, that's not very nice .. I built that 582 ....
1 person likes this -
I'm running their cranks and clutch also.
Good guys to deal with, and even pretty fast shipping even from Canada.
Poly Fiber Cleaners and Solvents Substitutes
in Technical tasks
Posted
I have used 105 gun solvent/cleaner w/poly on the 4 kit fox and 1 avid with good results.
I used the blush retarder on two of them but didn't see a difference.
I ask several shops what they use and they said 105. 1/3 the cost and not as deadly.
MEK makes your kids born naked.