High Country
Members-
Content count
479 -
Joined
-
Last visited
Everything posted by High Country
-
High Country added a post in a topic Avid heater
looks like it worked but you have to follow the link for the 3rd video for some reason
-Robert-
-
0
-
-
High Country added a topic in Hangar Talk
Merry Christmasyes I know its a bit early but thought this was good and just wanted to wish you all a very Merry Christmas. may the good Lord Bless you all in the upcoming year with blue skies and tail winds. let us not forget about the birth and life of our Savior Jesus Christ and the hope that we have through Him.
-Robert-
http://www.youtube.com/watch?v=iFJeaAq5Mv4
Joey this wasn't one of your birds was it?
- 1 reply
- 776 views
-
High Country added a post in a topic Welcome home Joey!
Joey, Glad to hear you are back stateside safely with your family, Thank you for your service and your families sacrifice.
Wishing you a very Merry Christmas
-Robert-
-
0
-
-
High Country added a post in a topic Wanted B Model Parts
You might look for MK IV tail feathers thats what I did, they were a direct fit to my B and now I have more surface area for the control surfaces. just a thought. I have some B parts still available from my build that I'm not using if you're interested shoot me a list of what you're looking for. have ELT, rotax exhaust, spars, nose fuel tank, coolant tank, and other misc parts can't quite remember what all off the top of my head right now would have to take a look would be happy to help if i can.
-Robert-
-
0
-
-
High Country added a post in a topic New Header tank for the Avid
tank looks nice but on a different note, is there any provision for venting it back to one of the wing tanks, I didn't see a fitting for this in your picture.
-Robert-
-
0
-
-
High Country added a post in a topic Parts for sale
good call Ed, Rod made my tanks for my speedwing, they are actually for the STOL but i made them work nicely and now I have more fuel capacity.
-Robert-
-
0
-
-
High Country added a post in a topic Wings Wanted
Ed, wish I could fill in more on this but i can't. Just remember looking at a KF IV at the local airport once and his bushings were much smoother and nicer looking than the one's I have on my Avid maybe someone else here could educate the rest of us on this
-Robert-
-
0
-
-
High Country added a post in a topic Wings Wanted
the flapperons are simply an aluminum tube for the spar with Styrofoam for the ribs all wrapped in thin aluminum you could make them pretty easily or even just cut off the bad part of the one you have and just replace the damaged end. if nothing else you could tear into it to have a better idea of their construction and make them yourself you would save some $$$ and know exactly whats in them would also be a good time to upgrade to the newer KF bushing design.
-
0
-
-
High Country added a post in a topic Steve Henry and his SuperSTOL
Thanks for sharing Joey, This is an awesome plane and Steve is an Awesome pilot. I was fortunate to see him perform at one of our Top Fun Flyers meetings in Nampa just after he build this one I think he only had about 4 hrs on it at the time.
-
0
-
-
High Country added a post in a topic Different wings
are your spars 12' plus the wing tips? this is normal or is your complete wing root to tip 12' sounds like you may be missing one complete wing bay. might be possible that the builder had aerobat spars and built them with HH ribs not sure why you would want to shorten up the HH wing though. are you sure you don't have flat bottom speed ribs in which case you have an aerobat wing (alum raps about 12") I'm not sure I follow this do you mean that the leading edge is wrapped in alum? I'm sure someone else more knowledgeable than I will help you on this matter. good luck
-Robert-
-
0
-
-
High Country added a post in a topic rebuilding Flaperon?
I had both of mine separate from just sitting for over 20 years. you will need to make sure the Styrofoam ribs are in ok shape repair or replace what is necessary to make the aluminum set down nicely again. then I just applied hysol all over them top and bottom then to the leading edge and hold it all closed until it sets up. I set mine on a long 2x4 (maybe 2 I can't remember) and another on on top of it and just set lots of weight (bricks or lots of full soup cans will work fine) on top of it to hold it all nice and tight for the whole length of the flapperon leave it set over night then just drill and rivet as was supposed to be done from the beginning. should be good as new. good luck
-Robert-
-
1
-
-
High Country added a post in a topic ekobond
-
High Country added a post in a topic F7A
do a search on here for "F7A" and you will find lots of good info "Fhttp://www.avidfoxflyers.com/index.php?/topic/1888-f7-a-update/?hl=f7a http://www.avidfoxflyers.com/index.php?/topic/241-f7a-bellcrank-mod/?hl=f7a
-
0
-
-
High Country added a post in a topic Finger Strainer BMAD
Looks good but why did you have to modify them, I used the ones from spruce that Joey showed and they went right in, just took a dremel with a sanding drum and removed a little from the #1 rib so I can get a socket onto them easily in the wings folded position to remove them for maintenance.
-
0
-
-
High Country added a post in a topic Handling the 9460 Hysol....
I also only got through about 4 ribs before it was setup too much to work it nicely. start with smaller batches and work your way up you will soon find out just how much you like to work with given your specific ability and working conditions. take your time and its really easy to make it nice. if you have the ability to adjust the climate I would set it around 65* and go with it. I used the baggie method and it worked great, cut just a very small part off the tip to make the "spout?" if you don't like the size of bead just cut it bigger. then wet a finger (you are wearing your protective rubber gloves right?) with rubbing alcohol to smooth everything out. lastly I marked my ribs in the order I wanted to glue them and bounced around I think I started at each end then did the tailed ribs making sure you have your tail spacing exact then the in between ribs, one rib had to go over the lift strut attach brackets so don't glue that rib until the rest are fully cured and you can get the brackets set where you want them. keep us posted on your progress
-Robert-
-
0
-
-
High Country added a post in a topic Phat Tires
Very nice Joey, I like it start where you can and work up. I'm still flying my paper airplanes but hope to ketch up some day
-
0
-
-
High Country added a post in a topic replacement wing tanks!
Amie, here http://performanceproducts1.com/ is Rod's website see what he can do for you. good luck
-Robert-
-
0
-
-
High Country added a post in a topic Who will the winner be?
fairings look nice but how are you to get them onto our struts? what is the weight gain? I would think you could make the 1" fairings work with our 7/8" struts if you could get them on
-
0
-
-
High Country added a post in a topic N139AH
Been slowly making progress on the Avid I now have 4 x-coats of EkoFill on the fuselage and 3 x-coats on everything else. the spraying goes fairly fast but it takes a while to sand. Its been taking me about 4-5 hrs to sand each coat on the wings between spraying but so far it is coming out very nicely. We had 70+ mph winds last night that took my paint booth for its first flight however so it will be a while before I can finish spraying... that and all the wildfires surrounding us right now anyways I don't have all up to date photos but here are some that i have. I chose to stitch the tail as well as the wings. its good to be done with the fabric work. and yes the pics are taken in the kitchen what better place to work on your plane than by the fridge and in front of the A/C
-
0
-
-
High Country added a post in a topic Requesting feedback on the Files section
anything on tuning and servicing our 2 stroke rotax engines would probably be helpful if your looking for something to do.
-Edit- Disregard looks like your already ahead of me
-
1
-
-
High Country added a post in a topic Nice C-5 video!
Great video thanks for sharing it with us
-Robert-
-
0
-
-
High Country added a post in a topic Requesting feedback on the Files section
Looks good Joey thanks for your hard work
-
0
-
-
High Country added a post in a topic Cabin Heat
What about something like this? http://www.ebay.com/itm/rotax-582-aircraft-heater-/121154713689?pt=LH_DefaultDomain_0&hash=item1c35623859 anyone have any experience using this http://www.ultralightnews.ca/rotax912/912-914cabinHeat.htm
-
0
-
-
High Country added a post in a topic Raising the skylight
the tubes go down the center between the seats so your head will not hit them I'm 5'10" and don't hit them anyway but with a headset on it will just about rub against the lexan so I want a tad bit more room to make it more comfortable, I then plan to put foam around the tubes to keep from banging them too hard in the event of a rough landing. I have to have my seat higher than most with this same airframe to accommodate the flapperon mixer which I have relocated under the left seat to allow for more baggage.
-
0
-
-
High Country added a post in a topic Raising the skylight
Ed, Ive seen this done to attach two pieces of lexan together (see pics) my reason for using the FG/CF would be to eliminate the compound bends in the lexan and hopefully make it last longer. you could easily mold two small channels pointing fore and aft to insert the lexan pieces into if you wanted then just rivet or screw it all together. I'm having a real difficult time removing the paper from my 26 year old lexan so i'm going to just replace it anyway so I'm thinking if I just make it exactly what i want to (one piece wind screen and skylight for now) to use as a mold and just lay up the carbon fiber directly to the lexan. you could then just remove it trim it up add a small spacer down the center the thickness of the lexan you wish to use and add another flat piece to the bottom of that which would make the small channels pointing fore/aft to slip the lexan into. did that make any sense? the whole thing could then be attached to the the front carry through just as before.
My main concern at this time is how to fair the raised skylight back down into the wing
-
1
-