Landcruisinmy93

Jim, I'm jealous. Not that I have a lot of use for skis, but I am curious if those are production pieces or did you make them? If you made them are they plans you could share or are they in your brain?

The "bubbling" appears to be weld over-penatration. As mentioned you could try to backpurge but I would suspect your tungsten is too large a diameter as is your filler rod as mentioned also. The amperage may be a hair too high and you may be dwelling. With thin wall steel and stainless steel you need to be moving along. I have made a lot of sugary stainless welds and a lot of overpenatrated welds with TIG in the past. None were critical but that is my $.02. 

I know the post is old, but adding observation and suggestion for future viewers in need of help.

Anyone out there have a router template for model 3 wing ribs? 

I should have done this before I sold the 3 ribs I had. Does anyone out there have router templates for making the ribs and false ribs for the model 3? 

I have a tracing 1Avidflyer sent me a while back but if someone has the template they'd either part with or loan I'd appreciate it.

7 kitfox 4 ribs on the way to 1avidflyer. I hope they're just what you're looking for Jim.

Kitfox 3 wing spars SOLD to a Local Team Kitfox member. I have a set of doors packaged up ready to ship, buyer backed out after hearing shipping costs. 

Seems VERY VERY similar to a magnum I tried to get last June-ish for $13k....right down to the timed out O-360.

Kitfox 3 wing ribs SOLD 7ecaflyer

I'm a dummy, Lol. They're the same

Jim! You have a magnum wing rib?

Greetings everybody. I am in need of a non-hinge wing rib. OR... a tracing. Can anyone help? I'd appreciate it.

Thanks,

Steve

My apologies to those who have asked for parts, schedule changes and an extended work schedule have made it very difficult to get around to packaging and getting shipping quotes. I will get ro it as soon as I can.

Wally, I have a pair for the kitfox 3 and a pair for the 4. 

I think I have kitfox 3 counterweight's. Would they work?

I love your mini+ do you have any plans, dimensions etc... for those great legs? Where are the getting your Apex mount from? Great job so far.

Sorry, only the listed items are for sale.

Yep. still have a pair.

Well, for future reference if someone wants the kitfox 3 ailerons it cost $900.33 to ship them to Illinois. Shipping anything over 12' nets you a massive upcharge. 

I appreciate that, it was sold shortly after it was posted. I called the 18th.

Greetings, I've managed to be too late on picking up several unfinished Avid Magnum kits over the last couple of years. I am really looking for fuselage but a decent priced kit is also on my radar. If anybody has a line on a magnum fuselage or a decent priced unfinished kit please let me know. I obviously don't have enough new projects, Lol.

Thank you,

Steve

Located in Eugene, Oregon. PM sent 7ECAflyer

Thank you everyone for your replies and for being so willing to help. The aviation community is a great little community to be part of. 

Greetings, I'm looking for the vertical stabilizer height, bottom dimension and top dimension.

Also the same dimensions for the rudder.

Likewise I'd like the dimensions for the horizontal and the elevator. Length, width at widest part and at the outboard end.

Thank you in advance for any help.

Kitfox 4 flaperons SOLD 109jb