-
Content count
71 -
Joined
-
Last visited
Everything posted by 4aplat
-
4aplat added a post in a topic need 912 install photos
Pictures here
http://perso.numericable.fr/brandon/lesetapes.html
-
0
-
-
4aplat added a post in a topic Weight and Balance
Hi
all the details are section VIII chapter 7 of themanual
IcheL
-
0
-
-
4aplat added a post in a topic Gear leg safety cable
thank's guys for dimensions and advices
I bought the tool in the morning and made the cables after
just have to put then on the plane (I've got a "tent and sleeping bag" week end with my daughter and 20 other pilots if the MTO is OK)
MicheL
-
0
-
-
4aplat added a post in a topic DAN DENNY LEARNING TAKE0FFS
Oh Oh
I've got the movie of my first landing (and take off) with the avid
It was the first time (for me) in a tail dragger
I wasn't allowed to fly the plane (I had to finish the bathroom first !!!!) and I was just training to drive the plane on the ground
but I pull the throttle on and...... it goes up !!!
and the only thing to do was to ........... land
the vid is in a bad quality but I wasn't supposed to fly this day
-
0
-
-
4aplat added a topic in Avid Flyer General Hangar
Gear leg safety cableHi
one of my safety cable is HS (the nicopress wasn't well swaged)
I think the other nicopress have to be changed, and making new safety cable would be more easy to do
does one of you have the correct dimensions of this cable (it is 19.5" long but I need diameter of the cable and size of the fixture)
thanks in advance
MicheL
- 5 replies
- 5,123 views
-
4aplat added a post in a topic WHAT TIME/DAY IS IT???
did you set "timezone" in your personal setting ?
-
0
-
-
4aplat added a topic in Avid fox flyers pics and vids
First flight of the year with a passengerFirst flight in 2012 with my 8 year old daughter
- 2 replies
- 968 views
-
4aplat added a post in a topic Odyssey PC545 differences
Hi
2 ref in the odyssey catalogue
same spec for the pc-545P and PC 545 MJ P
MJ = metal jacket
-
0
-
-
4aplat added a post in a topic tail wheels
-
4aplat added a post in a topic Vortex Generator
37 VG on each side
before I used to land @ 100-110 km/h
now it's 90-95 km/h (indicated speed, my speedo is false)
-
0
-
-
4aplat added a post in a topic Avid MK IV baggage/Cargo area
-
4aplat added a post in a topic Vortex Generator
I put the VG under the tail yesterday
now it's more easy to land at low speed with engine on idle (slow motion)
before the avid was like a flying "iron" now it is more light than before (don't have to use full trim)
MicheL
-
0
-
-
4aplat added a post in a topic Jabiru 2200 giant thread
The jab is supposed to deliver 80 HP
I'm steel looking for the 15 last horses (and may be more)
The jab is a direct driver and the rotax is re-ducted so it could have more RPM and a larger propeller (turning slower)
the rotax is lighter than the jab
so at the end, using a jab in an avid is a non sense (and I don't talk about valve guide failure and other problems)
-
0
-
-
4aplat added a post in a topic Jabiru 2200 giant thread
the link is about the 6 cylinders jab
this engine has a lot of problems like gas flow in the middle cylinder and hover heating in the same one
but the main problem of the jab is the cylinder head : not enough aluminum, bad quality valve guides (with a hole !!!), no valve gasket and for some (bad numbers) a camshaft for solid lifters used with hydraulic lifters etc.......
-
0
-
-
4aplat added a post in a topic flight manual
I don't know what I'm realy looking for
what is written in chapter IX is a bit "too much"
something like 0° flaps in cross wind, 10° when no wind .....
landing and take of distances on the yahoogroups document are less than what I could do ......... (at cross weight)
for Manu : the document of the APA seems to be the one from my avid : values are false !
-
0
-
-
4aplat added a post in a topic Jabiru 2200 giant thread
here is a "souvenir" of my first jab...........
no cooling problem on the plane.......
-
0
-
-
4aplat added a post in a topic Jabiru 2200 giant thread
may be this one ?
http://jabiru-engine-inspection.blogspot.com/
I'm not sure Jabiru is the engine of the future
MicheL
-
0
-
-
4aplat added a post in a topic flight manual
Hi Chris
I'm on the yahoogroups mailing list
I know the 3 files I could download
but what I'm looking for is a "how to take off" and "how to land" section (speed, flaps .....)
regards
MicheL
-
0
-
-
4aplat added a topic in Avidfoxflyers General Hangar
flight manualHi
I'm looking for a flight manual for an Avid MK IV
regards
MicheL
- 5 replies
- 880 views
-
4aplat added a post in a topic Rotax 912 iS
Hi
I think this engine is a non sense
what Ultralight pilot need is an ultralight injected engine
a 582 injection might be a better innovation than this too heavy 912
Avid's gross weight is 450 kg
French gross weight is 450 kg too
the more heavy is the engine the less gas or passenger weight you could bring.............
sorry for my bad English
-
0
-
-
4aplat added a post in a topic panel
tu as raison
la liste a disparu
et surement tout ce qu'il y avait dedans !!
elle fonctionnait encore en janvier
génial
-
0
-
-
4aplat added a post in a topic panel
je regarde vendredi pour la casquette
pour la liste de diffusion yahoo france, elle fonctionne encore.......... pour les membres de l'APA
-
0
-
-
4aplat added a post in a topic panel
5 layers
the panel's weight is 200 g
-
0
-
-
4aplat added a post in a topic Vortex Generator
I don't have TV !!!!
TV eat peoples brain .............
-
0
-
-
4aplat added a post in a topic panel
My first wish was to have an aluminum panel with a little box (the one at the bottom) for maps, sunglasses, pen ....
Machining aluminum is easy for me and I've never work with fiberglass
But the aluminum panel was too eavy
so I made a fiberglass one !!
here are pictures
-
0
-