brilenz
Members-
Content count
33 -
Joined
-
Last visited
Posts posted by brilenz
-
-
sold
1 person likes this -
Had a feeling you might!
1 person likes this -
-
Too many horses in the stable, time to sell. Kitfox 3 with 80hp HKS 700T, turbo with intercooler. Engine less than 200hrs, airframe less than 100. Check out videos @brianlenzmeier4906 YouTube
Dynon Skyview with ADSB in and out, complete panel by Advanced Flight Systems
TK1 Shockmonster with Airframes Alaska T3 shock rear tailgear
26" Desser tundra tires
Dual brake caliper setup
Full wing and tail VG'sCabin has been widened by about 3 inches
Message or call if you want more details of pictures
$35,000 OBO -
As always Jim- you are a wealth of knowledge- Thank you!!
Brian
1 person likes this -
Did you ever find one? Looking for the same
-
Once again modified my cowling for better cooling over the #1 cylinder. Posted the video on YouTube. I’ll add the link to this. Believe it or not that cowling you will see started it’s life out as a 2-piece round cowl-courtesy of Jim Chuk!
2 people like this -
Still looking for those doors if you have time to ship. Thanks!
-
on it- thanks!
-
How much do you want for them?
-
Good luck. Please let us know how it goes. Once you get the mounts welded on you will need to machine the step for the brake rotor and drill/tap the 3 bolt holes. I was going to do this on my milling machine using a rotary table but like I said I never got around to it. On the one with the slightly bent rim, it still held air and wasn't real noticeable. Will be curious how you make out because I'm thinking about doing a set so that I can swap from the 21" Nanco tires to smaller ones with wheel pants without having to peel the tire off.
I'll keep you posted- that's my plan with these as well, but to use the smaller tires to add penetrating skis
-
Well- since I haven't heard back from daphne, I ordered some wheels with those specs. Pulling out the tig to do some aluminum welding. I'll keep you posted
-
Any chance you have the original 8" wheels as well?
-
still have the doors?
-
Are these still available?
-
Hey are these still available?
-
Looking for a kitfox 3 lift spar. Undercamber wing. Kitfox Aircraft was going to take 6-8 weeks (which usually means 12-14...)
If I cant find one I am going to try and build my own with Carlson extruded aluminum so any advice on that would be appreciated as well!
Brian
-
Looking for a kitfox 3 lift spar. Undercamber wing. Kitfox Aircraft was going to take 6-8 weeks (which usually means 12-14...)
If I cant find one I am going to try and build my own with Carlson extruded aluminum so any advice on that would be appreciated as well!
Brian
-
putting in a new screen on gascolator, new fuel pump (inline electric), new pressure regulator, and new downstream filter.
-
I have the tanks empty and am looking for a scope to take a peek. Been using only 100LL of my home field. Never had any issue with my home fuel so I suspect its something settled in the tanks or header tank is more likely the culprit. The wing tanks look perfect from what I can see
-
Its fuel injected...
-
Has anyone seen this in their gascolator before? I don't think its from fuel contamination. The tanks (two wing tanks and poly header tank) sat built and empty for several years. All the lines are new. Really caramelized on. Took a scrub with brake cleaner to get it off. It also gummed up the header tank bottom drain / check valve
-
Checking to see if anyone has a set of the original douglas 8" wheels, possibly with the welded bolt bungs. Looking to set up a second set of wheel / tires for a tire penetrating ski setup
-
Checking to see if anyone has a set of the original douglas 8" wheels, possibly with the welded bolt bungs. Looking to set up a second set of wheel / tires for a tire penetrating ski setup
Avid Mark IV Heavy Hauler project for sale
in For Sale and wanted, you got it, I want it
Posted
is this still available?