RobS
Members-
Content count
177 -
Joined
-
Last visited
Everything posted by RobS
-
RobS added a post in a topic F7a Bellcrank
Someone sent me this drawing (or should I say picture) a few years back, but I can't remember who it was . . .
-
2
-
-
RobS added a post in a topic Cut down an ivo prop
I think Bryce is worried that a less than obvious crack will cause a piece to break off or the hub will fail. And then all hell will break loose.
-
1
-
-
RobS added a post in a topic Oshkosh 2018...Who’s going!
Oshkosh map . . .
https://www.eaa.org/~/media/images/airventure/maps/av17_visitorsmap_frontback.pdf
-
0
-
-
RobS added a post in a topic Watch the plane crash
Additional details at this site. Looks like the guy seen in the video was just trying to get away from the impending disaster.
https://www.mirror.co.uk/news/world-news/plane-crashes-head-truck-after-10954850
-
0
-
-
RobS added a post in a topic Left flaperion hinge failure.
Diagram for KF
-
0
-
-
RobS added a post in a topic Left flaperion hinge failure.
My solution probably won't work for you as I failed to remember your wings are already covered. I created a slot from the bottom side of the rib to insert the aluminum plate and plan to Hysol and rivet it in place - which requires access to the entire rib.
This post from another thread on this subject provides a reasonable solution for wings that are already covered. Look at the next to the last post by wypaul
http://www.avidfoxflyers.com/index.php?/topic/1061-broken-flaperon-pivot-point/#comment-4
-
0
-
-
RobS added a post in a topic Left flaperion hinge failure.
Tonight, I'll post some pictures of what I'm doing with my MK IV. I'm using a single piece of aluminum flat stock and had to Dremel a slot to insert the flat stock into the rib (beyond the tail).
Saw pictures of someone else who did this the same way, but can't find the post.
-
0
-
-
RobS added a post in a topic California Power Systems 2-Stroke Tech Articles all in one place
Sorry to hear this, but glad you're ok! Hopefully no damage to anything more than the prop.
-
0
-
-
RobS added a post in a topic Push Those Pedals!
This post on TKF may not address your specific concern, but it explains how moving the mounting bracket back changes the rudder pedal angle and makes it easier to stay off the brakes (see post #32). It seems somewhat counterintuitive, but actually makes sense and for a good solution. I have long legs and my knees will still be in my lap, but I believe this approach will help keep my toes off the brakes. And there's lots of other good rudder pedal info in this post.
http://www.teamkitfox.com/Forums/showthread.php?t=508&highlight=Pedal+geometry
-
2
-
-
RobS added a post in a topic Finally starting new hangar!
If this is the only time you'll need a portable band saw, you could rent one for about $20/day. Seems like it would be worth the $$.
-
0
-
-
RobS added a post in a topic Nose ribs
I had to remove all of my MK IV false ribs (both wings) due to the aluminum leading edge being a real mess. With a heat gun and patience, I was able to remove them all, clean up the spar and then put them back in place. A taut line from wing tip to root made placing them back at the correct height pretty straight forward. And then I replace the aluminum with a thin veneer of plywood.
-
0
-
-
RobS added a post in a topic ANR Hedset - is it worth it?
I have the original Lightspeed Zulu and it was well worth the cost. It does a great job on the noise cancellation, is very lightweight, and super comfortable.
-
0
-
-
RobS added a post in a topic Guess my weight contest
577
-
0
-
-
RobS added a post in a topic Transponders and Airworthiness inspections
Joey look at Section (d) (4) of this CFR - I think you may be ok to list it as INOP and get the inspection as is - seeing "you're the person "appropriately rated to perform maintenance".
https://www.law.cornell.edu/cfr/text/14/91.213
-
0
-
-
RobS added a topic in Close Call's and dumb stunts
Someone had a Very Bad DayLooks like a Maine Warden Service pilot had a very bad day. And these are the guys who tell the public at this time of year, make sure the ice is safe before you venture onto it!
http://www.wmtw.com/article/maine-wardens-plane-lands-on-lake-breaks-through-ice/14477569
- 2 replies
- 991 views
-
RobS added a post in a topic Landing Gear Option
Yes, a really nice setup, but very expensive!
-
0
-
-
RobS added a post in a topic Southeast Wisconsin
Welcome aboard!
-
0
-
-
RobS added a post in a topic Mk4 Gross weight
Spot on Ed. The higher the wing loading, the less you'll be tossed around in rough air
-
0
-
-
RobS added a post in a topic My mk4
You've got that right Ed! My son-in-law and I are about the same height and his head almost hits the frame and mine doesn't, but my knees are up under my chin .
-
0
-
-
RobS added a post in a topic Float Flying Almost Over
Stay safe - are both the home and the planes in harm's way?
-
0
-
-
RobS added a post in a topic Kitfox 4 rebuild
Take it slow and steady Ed . . .
-
1
-
-
RobS added a post in a topic Groove gear
If you know the type/model of Grove gear you have you can check their site for the specs including weight. Avid MK IV tail dragger comes in at 32 lbs.
http://www.groveaircraft.com/landing_gear.html
-
0
-
-
RobS added a post in a topic HANGER FULL- KITFOX FUSELAGES & PARTS
Ed I'm very sorry to hear this. Prayers ascending and positive thoughts headed your way. Just beat that SOB "C"!!
-
1
-
-
RobS added a post in a topic WANTED - AVID FIBERGLASS WING COVER
He said it sold soon after he made the post.
-
0
-
-
RobS added a post in a topic WANTED - AVID FIBERGLASS WING COVER
The aluminum on my wings - which I replaced with .8mm birch plywood - was done in three pieces. And I used three pieces of plywood and had no trouble laying down the seams on a rib. After gluing the plywood to the rib, I used a small amount of Hysol and light sanding to feather-in the seams.
-
0
-