-
Content count
821 -
Joined
-
Last visited
Posts posted by chopndrag
-
-
If you want floats, I have a set of genuine Avid floats for sale, only a couple of hours away....
i was going to make them as a side business but have no time for it that is why i am selling the molds .
-
-
-
Using my phone I'll see what I can do
-
Have a aeroconversion trim system I tried in my Sonerai 2 and it did the job just not like I wanted. Used for about 3 hours everything is there plus brackets. $80 plus shipping
-
Mayb could talk me out of my modified model one, but u have to take everything i have for a model one with it, and that b up in price, i have enough parts to build a second plane, but if those others r to spendy for u, u mayb better off lookin for something that needs work like Rentz has. Mine would cost u $30,000 with everything including skis, floats, 24” tires, open trailer, and all parts.
I would possibly be iinterested in the parts if there was a fuse and wings with it. Need a starting point for a project.
-
Right on!! Keep me posted on it, and like to c the pic’s, Thanks
can't load them the fiĺe is to big.
-
Bought from rans 4 @ 6.5 ft long
1 person likes this -
Long strips I'll take pictures and all that
1 person likes this -
I have a tube of Gap seal never used and have no use for it . Not even sure what I paid for it so reasonable offers accepted.
1 person likes this -
I have a tube of Gap seal never used and have no use for it . Not even sure what I paid for it so reasonable offers accepted.
-
I have a tube of Gap seal never used and have no use for it . Not even sure what I paid for it so reasonable offers accepted.
-
Looking for a avid airframe and wings. In short I'm going to use it to build a new type of airplane but the avid airframe would be a great base to start with. Let's just say the Spirit of St Louis is going to start becoming a kitplane. Verner radial for power its all in the works.
1 person likes this -
Looking for a avid airframe and wings. In short I'm going to use it to build a new type of airplane but the avid airframe would be a great base to start with. Let's just say the Spirit of St Louis is going to start becoming a kitplane. Verner radial for power its all in the works.
-
I know this is for avids kitfox etc but maybe someone is looking for a go fast plane. I have a tri q project that needs a home. It's in tub mode ready for wings to be installed. Tons of parts come with it . No avionics, nose gear or cowl. Asking 4000 located in Zephyrhills, FL can't seem to load pictures
1 person likes this -
Well I recently got a sonerai 2 and need a longer prop. It has a great plains 2180 with a 52×46 and is more climb then I want . I am looking for a 54×46 prop with a 6 bolt pattern 4 inch spacing and 2.75 hub thickness. Sterba retired and I really don't want to wait 4 to 6 months for a Culver.
-
I just upgraded to lithium. Best choice I've ever made. Way lighter and cranks at insane speeds.
-
Chopndrag, I don’t know if you have done much research into the Yamaha motors but you might look at the apex, it seems the weight difference is negligible. The apex has a way bigger following but more importantly more people are stepping up to provide the aviation specific parts for the apex engine.
My hanger neighbor has been running the 3 cylinder model for over 300 hours with zero issues and it works great. Plus the dimensions are almost exactly the same as a 582.
-
I need a 582 fwf
That looks like a break Foundation to start with. I just started the journey of pulling this tank VW off the front end of my Avid A model. I might be very interested in that 582 FWF. I know you would have is a kitfox but I'll be fabricating mounts anyways.
Jeff
I have a 582 I'm selling soon minus gearbox and radiator. Going with the 3 cylinder Yamaha in my avid soon.
-
I see you have that round cowl installed. Do you think it will work for the Yamaha engine? Some one else I know of is going to put a Yamaha in their Avid, and we were trying to sort out what cowl will work for them. They are using the RX1, I'm not sure of the size difference from the 3 cylinder. Thanks, JImChuk
The measurements are damn near exact for both my 582 and the 3 cylinder Yamaha. I think there's maybe a 1/4 inch difference in the height which I have plenty of room for.
-
-
I'm in the process of getting my mk4 ready for the 3 cylinder 130hp version . It's close to the same weight as a 582 and my hanger neighbor has about 300 hours on his gyrocopter.
2 people like this -
My temp gauge is acting funky and I wanted to try a gauge from my car. Would it work since it's a 3 wire set like my westach in the plane ?
-
Took a break and was doing a ton of work on my plane. Ended up painting it and way to many other things to list but I did keep the radiator in the cowl and it stays at 160° in the summer heat woohoooo. Now if I could get pictures to load that would be great.
1 person likes this
Float molds for sale
in For Sale and wanted, you got it, I want it
Posted
They would probably work for all kinds of planes but figure try here first