-
Content count
58 -
Joined
-
Last visited
Everything posted by Goldendale-flyer
-
Goldendale-flyer added a post in a topic Installing elevator and rudder hinge pins
I am having a problem finding the 5/16 nylon tube with 3/16 ID. Anyone have a source?
-
0
-
-
Goldendale-flyer added a post in a topic Installing elevator and rudder hinge pins
Thank you both for the help.
-
0
-
-
Goldendale-flyer added a post in a topic Installing elevator and rudder hinge pins
Is this nylon tubing like for a water line to the refrigerator. I measured a couple of metal tubes and the OD I would need is close to 5/16 with an ID of 3/16. Does that sound correct?
-
0
-
-
Goldendale-flyer added a post in a topic Installing elevator and rudder hinge pins
Is the offer for tubing still open? I am working on my kit (third owner) and have found several pieces missing in the vertical stab and horizontal stab.
Thanks,
Rick
-
0
-
-
Goldendale-flyer added a post in a topic MKIV Landing Gear Assembly
Hi Paul,
I have a stock pair of main landing gear. You can email me if you're interested.
Rick
-
0
-
-
Goldendale-flyer added a post in a topic Avid Mark IV nose wheel assembly with main gear
Looks similar to the one I removed from my project. I converted to bush gear and tailwheel.
-
0
-
-
Goldendale-flyer added a post in a topic Upholstery Avids, fox
What is this for? Avid or Kitfox?
-
0
-
-
Goldendale-flyer added a post in a topic Avid Project for Sale
Hi Avid Randy,
I have a set of mains for a nose wheel config. Let me know if you are still looking.
Best,
Rick
-
0
-
-
Goldendale-flyer added a post in a topic Removing Hysol
Thank you everyone for your input on this.
Rick
-
0
-
-
Goldendale-flyer added a post in a topic Removing Hysol
Thank you Geoff.
-
0
-
-
Goldendale-flyer added a post in a topic Removing Hysol
Since the tank replaces several ribs and I think a drag tube, which would indicate to me that the tank is providing mechanical strength to the wing assembly. That would seem to indicate Hysol. Am I missing something?
I thought scratching the spar with sand paper was bad since it helps for a stress riser in the spar.
-
0
-
-
Goldendale-flyer added a topic in Avidfoxflyers General Hangar
Removing HysolI have an Avid MK IV that had the old tanks removed (mostly) and I need to put the new tanks in. I want to use a heat gun to remove the hysol that is still stuck to the spars. What is the appropriate temperature to use? I want to soften the Hysol but the ruin the temper of the spars.
Best,
Rick
- 9 replies
- 1,818 views
-
Goldendale-flyer added a post in a topic Radio
Surprised you're having problems. I had an A6 I used in my cub (no electrical system) and flew across the country with it. I would recharge it at night and be good for the day.
-
0
-
-
Goldendale-flyer added a post in a topic WTB Kitfox Leading edge cuff
Hi Randy,
Do the cuffs improve the performance? If so in what direction better cruise speed or lower stall speed?
Best,
Rick
-
0
-
-
Goldendale-flyer added a post in a topic Nearly a giveaway
where are you and what do you want for the engine, mount and prop?
Rick
-
0
-
-
Goldendale-flyer added a post in a topic wanted
Hi John,
How are you doing? Does the above message mean you are no longer interested in my main gear? Let me know.
Rick
-
0
-
-
Goldendale-flyer added a post in a topic Searching for an tricycle-gear for an Avid-Flyer MK4 Heavy Hauler
I sold my nose gear to John. He was talking about buying the main gear as well but I have not heard back about that. I did pass Johns email address to Christian.
Rick
-
0
-
-
Goldendale-flyer added a post in a topic Wing Ribs
Nice Air-stream you have in that one picture.
Rick
-
0
-
-
Goldendale-flyer added a topic in Rotax and other engines
RotecHas anyone flown a kitfox or an avid with a rotec 2800 radial? Seems like a lot of weight up front. I look forward to hearing.
Rick
- 10 replies
- 4,062 views
-
Goldendale-flyer added a post in a topic nose dragger mains
Hi John,
Let me know if you want to buy the mains we talked about.
Best regards,
Rick
-
0
-
-
Goldendale-flyer added a post in a topic D-Motor
I saw Doc Bailey the dealer in Florida about a year ago. He ran the motor for me and the 4 stroke is nice an smooth. HP is 93 at 3100 rpm and an installed weight of 125 lbs. Just saw they reduced the price to $15,900.
-
0
-
-
Goldendale-flyer added a post in a topic Avid/Kitfox or project wanted!
Hi Kenneth,
I have an Avid MKIV with HH wings, new fuel tanks, bush gear and standard gear.
-
0
-
-
Goldendale-flyer added a post in a topic Suppliers of new parts for older models?
I currently have a Mk IV for Sale. $8,200 obo.
-
0
-
-
Goldendale-flyer added a post in a topic Avid Mk IV HH kit
Hi Jim,
I do not have the old tanks.
Rick
-
0
-
-
Goldendale-flyer added a post in a topic Avid Mk IV HH kit
This is HH with Stol wings. Tanks are there for both wings. The guy I bought it from removed the original tanks to replace them with the newer tanks. There is a brush gear as sold by Brett. Also a tail wheel. There is no fwf components other than the cowling. It does have the 16" stretch. The wings have been on it, the tail will bolt right on. That's about it. covering material is there but the chemicals are pretty old.
Rick
-
0
-