-
Content count
41 -
Joined
-
Last visited
Posts posted by Kahle76
-
-
Wow, that would be real nice if it's so. I'll have to go back and rewatch the video to have a look. I will call Ed and let him know if it is him. Sure enough, it's there right between Aircraft Exhaust and Airframes Alaska. Good catch to see it. JImChuk
Give him our best. I stopped by his house 6? years ago when I started my Kitfox rebuild. What a great guy!
-
I was just watching Mike Patsy’s new video on the scrappy build and he’s putting the names of people and organizations on scrappy. At 17:22 it appears that he had EDMO painted on the fuselage.
1 person likes this -
I’m hoping Ed is recovering from his battle. Has anyone heard from Ed MO?
1 person likes this -
For polyester I would wax the cowl with Johnson's paste floor wax three coats dried and buffed between coats and then 3 coats of PVA. Good luck with your project.
I’ve made many molds and castings using these two releases. When you spray on the PVA, mist on the first coat and the successive coats should be light. If it beads up, you sprayed too much. Wash it off with water, let it dry and spray again.
-
Next time you’re in Cape, give me a call and I’ll buy you lunch.
1 person likes this -
I would start by having your soil tested. Apply lime and fertilizer according to your test results. I’ve had good luck using an organic fertilizer on troubled yards.
-
I have ordered the same AOA. Could you enlighten me on how you retrofitted the pitot fixture on your wing?
-
I couldn't give my pair away.
-
I fished the Sue back in 1988 with Mike Lutes.
-
I love gravel bar landings on the Susitna. Makes for a practice paradise.
I fished the Sue Baack in 1988 for silvers with Mike Lutes.
-
I used an oil base sculpting clay to build up the clearance on my cowling. It can be shaped and smoothed out to the exact shape desired. Lay one layer of glass over the the clay and lapped over onto the cowling about an 1", let cure, remove and completely clean the clay from the back side, lightly sand and apply two layers of glass on the back side and lap onto the existing cowling about an inch.
4 people like this -
Wow, thanks for the info!
-
I'm looking for a faceplate fo a PS Engineering PM1000 intercom in a horizontal configuration.
Thanks,
Mike Kahle -
Wife and I are going for 3 days. Not for sur which 3 yet.
-
Was it Mr. Basler?
-
Keep your head up Ed, strong will and hope can go along way. Also a few prayers from your friends can't hurt.
1 person likes this -
Sorry we missed your bbq. It's hard for me to miss the honor flight arrival.
-
-
Kale76, what model is that (IV?). Looks great!
Yes. It's a IV. Don't get to work on it much during the summer. Hope to finish this winter.
-
-
I used polyester building reproduction trees, rocks , Etc. for museums and after using epoxy on my Kitfox, I found epoxy is much stronger per pound than polyester and it will eat blue foam.
1 person likes this -
Looks good!
-
Sorry to hear about your engine, but glad you made it home OK.
1 person likes this -
I loaded the 2015 app and even though it's titled "2015", it has the 2016 schedule. Used it the last couple of years and it's a definite asset.
1 person likes this
Kitfox 2 build manual PDF
in Kitfox II
Posted
Have you tried Kitfox?