Xengineguy
Members-
Content count
14 -
Joined
-
Last visited
Posts posted by Xengineguy
-
-
Thanks Chris, I will contact them . Still have the factory exhaust with one broken tube that I am getting welded so time is isn't a factor so far.
When you take it to your welder,if it's stainless,make sure he can purge the inside with argon while welding. Or he can use a shielding "flux" inside the tube to prevent sugaring. If you don't the outside will look nice but the inside looks like crap and will likely break. My 2 cents
2 people like this -
You might want to check the bolt pattern, 2 different for the 912 . Early 912 are a little different at least on the big bolt circle.warp drive hub old style triangle no blade's hub in good shape.make me an offer.
-
New set of Cabane style highwing gear. chromoly construction,very nice! Used to fabricate jigs only.
As shipped from highwing. 1500.00. Offers? Looks like this gear.
Looks like the gear is SOLD. Thanks everyone!
1 person likes this -
New set of Cabane style highwing gear. chromoly construction,very nice! Used to fabricate jigs only.
As shipped from highwing. 1500.00. Offers? Looks like this gear.
Still have this gear guys! It's new new new. Someone needs this more than I do. Save some $$$$$$!
-
Hi guys I'm looking for a complete set of flapper on hanger brackets. Kitfox iv.
Also anyone want the gsc prop that came with the kit? New still in the box, 300.00
80 hp 912 pattern. Thanks Mike
-
Do you still have this gear for sale?
Yes I do,
Very nice gear,as shipped from highwing. Mounting bolts,paperwork,etc...
I only used it to make jigs for my gear. Perfect condition save some money 1400.00 + shipping!
Thanks. Mike
1 person likes this -
Yes they are bare metal. No mods, completely stock. Very nice gear! All the bolts and paperwork.
-
Just measured the attach points on the mod IV, looks like overall front to rear is 13.5"
Front width c to c. Is 32 3/16"
Rear width c to c is 32 3/8". I measured with a tape measure by myself so I could be off a little.
Thanks everyone. Mike
-
Ed the outside measurement is. 85". From the ground to the planes underbelly is. 31". This is with 21 x12x8. Tires
Bird dog I don't know if the avid is the same. If you want I. Could post some measurements.
-
Ok guys let's make it 1400.00. Need to buy some more parts! This is new never installed set! BUSH GEAR!
Check out the cost at highwing llc
-
Had a feeling. It did look very complete and what work had been done looked pretty nice too, good for you. Sad though, that another builder went West without realizing his dream. Make him proud!
Will do my best! Will have a lot of xtras left over after the build. Trying to keep it light. and simple Will post more parts when I get time. Need to find a few active kitfox typ people in the Mi. In. Oh. Area. Would like to get some time in one before I finish .
Thanks everyone Mike
-
That is the kitfox that sold at the estate auction. I ended up buying it from the guy that got it at the auction. He made a little but at least I knew what he gave for it. Very nice and complete kit,Welcome Xguy, just curious if you picked up that plane at an estate auction in OH last year? I haven't seen too many 4's with the orange powder coat like mine and tend to take notice. I almost drove over to check out the auction but schedule conflicts won out. Does good on the bush gear!
I upgraded a few things (like the gear). Just fired the rotax this weekend. Runs great!!
-
SUBARU TO ROTAX PROP ??
in Technical tasks
Posted
Hi Ed,
Wanted to let you know early 912 bolt patterns or drive lugs are slightly different than newer versions. I found both patterns on the net
When I needed them. BTW. Powerfin doesn't make a hub for early 912 engines.