thebriman

Contributing Member
 View profile  See their activity

  • Content count

    178

  • Joined

  • Last visited


Everything posted by thebriman



  1. thebriman added a post in a topic "To paint or not to paint" - Faperon Hinges   

    Mine have the lovely flaking paint trailer trash look.  So if thats what you're going for I see no other way than painting them.  
    • 1


  2. thebriman added a post in a topic Wanted: 2 #50 Bing 54 Idle Jets   

    Let me know.  If you decide to get rid of them PM me, if not I'll order a set full price.
    • 0


  3. thebriman added a post in a topic Wanted: 2 #50 Bing 54 Idle Jets   

    i have stock #55 jets right now. 
    • 0


  4. thebriman added a topic in For Sale and wanted, you got it, I want it   

    Wanted: 2 #50 Bing 54 Idle Jets
    I am in the market for two 50 size bing idle jets.  at 30 bucks a pop I figured I would ask around to see if anyone has a set laying around collecting dust. 
    • 10 replies
    • 1,083 views


  5. thebriman added a post in a topic Empty weights   

    My c model sn 958 weighs 585 pounds empty. I have dual wing tanks, custom tall wide spring gear, whelen strobes, electric pitch trim and 21 inch desser tires. Radio transponder, ifly GPS, and boiler guages too. Carpet and full lexan doors. Dual matco brake caliper set up. I wish it was a bit lighter but it is what it is. I'm about 30 pounds too heavy I should probably start there.
    • 0


  6. thebriman added a post in a topic Has anyone replaced the rear prop shaft seal on C box   

    I ordered 2 seals from McMaster-Carr.  $6.87 each.  Part number 5154T67.  A lot less than the 25 or so Rotax wants for theirs.
    • 1


  7. thebriman added a post in a topic Has anyone replaced the rear prop shaft seal on C box   

    good idea for the puller Paul.  Thanks gents 
    • 0


  8. thebriman added a topic in Avidfoxflyers General Hangar   

    Has anyone replaced the rear prop shaft seal on C box
    The rear prop shaft seal on my c box leaks and is getting worse.  Has anyone ever replaced it?  Its a 25x38x7, number 10 on the rotax diagram and pn 930-675.  Aftermarket seal thats been used is the past would be fine too.
    • 7 replies
    • 750 views


  9. thebriman added a post in a topic Insurance   

    I pay about 430 bucks a year through AOPA for liability ground and flight.  1M loss and 100000 per passenger.
    • 1


  10. thebriman added a post in a topic Flushing wing tanks and adding sight tubes   

    I looked up McMaster Carr and found some buna-n close tolerance sized balls.  Should be impervious to fuel as its buna n.  They only come in black.  Would they float?
     
     
    High-Strength Oil-Resistant Buna-N Rubber Color: Black Temperature Range: See below Tensile Strength: 1,500 psi Use indoors Also known as nitrile, acrylonitrile butadiene, and NBR, this rubber has a good balance of oil and solvent resistance when compared to other rubbers, but is not as weather resistant.
    Tight-Tolerance Balls—Precision Ground Finish   Temperature Range: -20° to 200° F Durometer hardness is 70A (hard). Durometer tolerance is Â±5.
    Dia. Dia.
    Tolerance   Each 3/16" ±0.003" 1854T42 $1.31 1/4" ±0.003" 1854T44 1.56 5/16" ±0.003" 1854T46 1.57 3/8" ±0.003" 1854T48 1.85 7/16" ±0.004" 1854T52 1.91 1/2" ±0.004" 1854T54 2.32 5/8" ±0.004" 1854T56 2.80 3/4" ±0.004" 1854T58 3.24        
    • 0


  11. thebriman added a post in a topic Anyone near Atlanta,GA   

    Leni are you still planning on your trip to GA next month?
    • 0


  12. thebriman added a post in a topic First engine out but I still made the Fly-in!   

    Thanks for sharing Joey!  Who knows, maybe you just saved a life.  
    • 0


  13. thebriman added a post in a topic I've got it covered......   

    Red Wings are the only boots I wear.  Make that 2 for Red Wings.
    • 0


  14. thebriman added a post in a topic I've got it covered......   

    Looks good Jim! 
    • 0


  15. thebriman added a post in a topic I've got it covered......   

    I agree with EdMO.  I am in the process of recovering part of my left wing where I added a wing tank.  The floor of my shop is a disaster! My workbenches are piled up!  Somehow I still find everything im looking for!!!
    • 0


  16. thebriman added a topic in Avidfoxflyers General Hangar   

    Oshkosh 2015
    It may be a little bit early, but I can't help it!  Who is planning on going to Osh again this year?  I left Wednesday last year and thus missed the get together but am planning on the whole week this time.  
    • 5 replies
    • 954 views


  17. thebriman added a post in a topic Cable operated enrichers (choke) 582   

    I have a primer, works good. Just want to have both.
    • 0


  18. thebriman added a topic in Two Strokes   

    Cable operated enrichers (choke) 582
    Those of you with cable operated enrichers, what cable systems are you using to control them?  I have the enrichers that will accept a swege but I dont want spaghetti in terms of operating them. 
    • 16 replies
    • 1,834 views


  19. thebriman added a post in a topic Float recall 912   

    The only time a nose wheel would be nice is... Wait nevermind.....
    • 1


  20. thebriman added a post in a topic STOL wing ribs   

    I have my left wing off right now adding a 13 gallon tank.  I'll make you a template tomorrow and post it.
    • 1


  21. thebriman added a post in a topic First flight with my daughter   

    Awesome Joey!
    • 0


  22. thebriman added a post in a topic New elevator!   

    I flew the Avid with the new elevator for the first time today!  What a difference.  I only flew for about half an hour, but the results were dramatic to say the least.  I have plenty of trim authority for cruise and climb and descent.  I am going to have to get used to not having to haul back on the stick all the time especially on final!  On a bright note I did all the flying without my 15 pound ballast weight on the towbar attach, so that thing has a new home gathering dust on the shelf in my hangar.  I did a few stalls power off and on and noticed that the stalls are sharper and more crisp, which with more pitch authority was expected.  The tail comes alive almost as soon as power is applied on the takeoff roll.  I'll do some more flying later today and explore it a bit more.  But so far I have nothing bad to say about this mod.  
    • 0


  23. thebriman added a post in a topic New elevator!   

    I did.  My set up is a mirror of yours.  Although I believe Lowell's fabric skills are a touch better than mine.  This was the first time I did any covering, I did have a few imperfections and wrinkles in the tapes.   
    • 0


  24. thebriman added a topic in Avid Model C   

    New elevator!
    I followed Joey's lead on this one and over the past month I modified my elevator to MKiv specs.  I haven't flown with the new elevator yet because the birds have been walking the past few days but as soon as the weather breaks I'll take it for a spin!  It will be nice to not run out of elevator at slower speeds and also be able to trim off the stick forces.  I have a 15 lb weight hanging from one of my tow bar attach points to help with the stick force, hopefully this mod will allow me to remove it.  We'll see! 
    • 11 replies
    • 2,284 views


  25. thebriman added a post in a topic Prop shaft seals   

    I just let mine leak. 
    • 0