Parting out Kitfox 2

[1avidflyer 1983]

Hi all,  I ended up with a rough shape Kitfox 2, and am going to part it out.  Looks like it was ground looped, and seat truss is bent.  Looks like it was repaired once and then fixed again, then bent again.  Not beyond hope for someone who can fit and weld tubing though.   Wings are pretty rough, rear spars are salvageable, and maybe one front spar.  Flaperons are a bit dinged up, but center tube isn't bent.  Could be used again.  Landing gear, 8" wheels, hydraulic brakes all appear to be fine.  Rudder pedals good, joysticks and cross tube plus mixer controls behind the seat seem fine as well. 582 motor mount, and back two pieces of cowl, plastic fuel tank, and turtle deck also there.  Anyone needing any of these parts can contact me with a private message for starters.  If you want pictures of anything in particular, say the word.  Thanks,  JImChuk

[Taylor 0]

I am looking for the rib that connects to the flapperon. Do you happen to have one?

[1avidflyer 1983]

Do you mean you need one of the Kitfox 2 ribs with the long tail?  JImChuk