Mark IV radiator bushings

8 posts in this topic

Posted

Is there an outlet for rubber bushings for the Mark IV radiator mount? They are two peice. One side is 1 1/4 OD, 5/16 thick with a 3/8 hole in the center. The other is 1 1/4 OD, 7/16 thick and one side has a 3/4 raised area where it sets into the mount. Picture attached.

2017-07-14 20.43.38.jpg

Share this post


Link to post
Share on other sites

Posted

2017-07-14 20.42.55.jpg

Share this post


Link to post
Share on other sites

Posted (edited)

LEAF has some that look like yours.  Part # are H6141 thru H6144 depending on hardness.  Another part # is  H6150.  L  Look on page 21, center left column.   Sizes/dimentions are just above the mounts.  JImChuk

http://onlinecatalog.leadingedgeairfoils.com/app.php?RelId=6.4.3.11

Edited by 1avidflyer

Share this post


Link to post
Share on other sites

Posted

Worse some to worse,  you can go to the rubber and gasket place and have them cut out. That's what I did with my engine mounts.

Share this post


Link to post
Share on other sites

Posted (edited)

I have a post somewhere here but autozone carries a substitute for $4.00 they are for windshield wipers it's a 4 pack in the help parts section

Is there an outlet for rubber bushings for the Mark IV radiator mount? They are two peice. One side is 1 1/4 OD, 5/16 thick with a 3/8 hole in the center. The other is 1 1/4 OD, 7/16 thick and one side has a 3/4 raised area where it sets into the mount. Picture attached.

2017-07-14 20.43.38.jpg

 

Edited by chopndrag

Share this post


Link to post
Share on other sites

Posted

I needed the smaller barry mounts for my radiator set up . I ordered a pair from aircraft spruce and they were to big . So while I was at the airport I decided to run to autozone for a couple things. I brought in a old mount and asked if they had anything like it . Come to find out windshield wiper motor mounts fit the bill . They cost 3.99 for 3 and worked great . 

20170401_184615.jpg

20170401_184556.jpg

2 people like this

Share this post


Link to post
Share on other sites

Posted

Thanks for the hook up Chopndrag. They worked great. 2017-07-17_19.24.39.thumb.jpg.5118d8f17c

1 person likes this

Share this post


Link to post
Share on other sites

Posted

No problem 

Thanks for the hook up Chopndrag. They worked great. 2017-07-17_19.24.39.thumb.jpg.5118d8f17c

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now