Thanks , asking Allen and wanted your opinion as well. By the way, should I start a post on my project, and add photos and ask questions or do individual posts for each problem, or jump in on others posts that are covering the issue.
Thanks , I'm going to take you up on your offer to help. By the way, should I start a post on my project, and add photos and ask questions or do individual posts for each problem, or jump in on others posts that are covering the issue.
Has anyone welded or know of anybody that can weld the three pieces of aluminum , machined and tapped them for the brake rotors. Not sure what the original brakes were but I believe I have matco's. Thanks
I purchased these because of the talk of them being scarce. I wanted to have a spare set to install asphalt friendly tires. What needs to be done for them to accept a rotor. I thank I have matco brakes. Allen did you have the other 3 holes drilled? Are you going to sell them. Just Plane Mike
Greetings , after reading all the responses in this post I did a diligent search and I believe I've located the wheels mentioned as being the original type / size of wheel.These are the 3 hole ones mentioned. I found them on eBay. I bought 2 of the single ones listed. It stated that was all he had. I went back to his listings and I found the following. One is a listing of 3 of the wheels. It looks like he has several sets of these. If you contact him maybe he might separate. The other listing is for the wheel in a black finish. https://www.ebay.com/itm/401323693974 https://www.ebay.com/itm/401691760430 Hope this helps. Just Plane Mike