teammoose

teammoose's Activity

1. 
   
   

   teammoose added a post in a topic Rudder Pedal Bearing F-50    10 Feb 2023

   Thanks Jim.  I figured it was hard rubber or nylon. I can copy one of my others for sizes. Thanks for the response and info.    Jim Vaughn
   

   • 0
2. 
   
   

   teammoose added a topic in Technical tasks    8 Feb 2023

   Rudder Pedal Bearing F-50

   We are rebuilding and stretching a Model C Heavy Hauler.  Getting close to covering the fuselage and decided to add co-pilot brakes and update the master cylinder geometry.
   Thru some brain fade I managed to lose one rudder pedal bearing part F-50 on the plans.  I do NOT have a parts list so I have no info on F-50.
   Can anyone provide purchase info on F-50 and / or an Avid parts list? 
   Thanks,
   Jim Vaughn
   Pinola, Indiana
    
   

   • 2 replies
   • 468 views
3. 
   
   

   teammoose added a post in a topic Fuselage Stretch - best way?    9 Dec 2021

   Thanks Randy, it sure does help.  We will set the fuse up on a table, level it via the door tubes and see where we are with the tail window.  I think we will be good from that point.  Thanks again for the reply, and Have a Merry Christmas!
   Jim Vaughn
   

   • 0
4. 
   
   

   teammoose added a post in a topic Fuselage Stretch - best way?    12 Nov 2021

   Randy, You posted " Before cutting the fuselage we leveled it with reference tubing at the wing root and the horizontal stabilizer areas to be sure we maintained the level and alignment of both ".  Can you tell us what the horizontal stab angle is when the fuse is level?
   We just picked up a model C that suffered a hard landing(crash).  The entire tail was pushed upward breaking the upper longerons.  Someone cut the other tubes for recovery or transport???  So we have no reference for repair.  We want to extend the fuse while making the repairs.  We were thinking of making the stab adjustable but I prefer to start with the proper angle built in.
   Thanks for any info.
   Jim Vaughn
   Pinola, Indiana
   

   • 0