Snipe

Members
 View profile  See their activity

  • Content count

    40

  • Joined

  • Last visited


Everything posted by Snipe



  1. Snipe added a post in a topic Luga NR prop selection   

    No I sold my Merlin with the IVO and sold the Luga to another guy. Looking back I wish I would have tried the Luga. The plane I own now had a timed out Hartzel CS and I replaced it with a MT wow what a difference plus it was 28 lbs lighter
    • 0


  2. Snipe added a post in a topic Merlin GT   

    Yes it went back to Alberta. It’s parked in a brand new hanger in Vulcan. There are days I wish I still owned it.
    • 0


  3. Snipe added a post in a topic 100hp Cylinders on a 912 UL   

    How high is top of elbow compared to stock?
    • 0


  4. Snipe added a post in a topic 100hp Cylinders on a 912 UL   

    This balance tube conversation is very interesting. I always have a out of balance situation somewhere in the mid rpm range and it’s next on my list of things to do. I am going to use 1/4 to 1/2 inch off of manifold then 1/2 inch Id pipe for crossover as I can do this quick...if it gets rid of mid range out of balance I won’t go any further. My cowl only will give me about 1/2 of clearance over the stock balance tube so it going to be a challenge to go 1”. I increased discharge hose size on my sprayer nurse tank from 2” to 2 1/2” without changing anything else and it was a day and night differance so hoping it works on the balance tube as well.
    • 0


  5. Snipe added a post in a topic Luga NR prop selection   

    I was doing a bit of eyeballing the old prop vs new for blade to cowl clearance, with prop pitched fairly course which is likely to course there is about 1/2 clearance between back of blade and cowl. Will I need a spacer? I am going to use a spinner like the one Tjay has so no clearance needed there.
    • 0


  6. Snipe added a post in a topic Luga NR prop selection   

    He sent me a lengthy letter when I inquired about were my prop was. He said the Amazon like company that owned the building he was in gave him the boot and then he was also shut down due to the flu so it sounded like he was or still is a one man show for time being.
    • 0


  7. Snipe added a post in a topic Luga NR prop selection   

    thanks for that.
    I also notice there is no mounting hardware came with it so will have to find some in N America I can’t wait for them to come from overseas.
    • 0


  8. Snipe added a post in a topic Luga NR prop selection   

    My NR Prop arrived but no installation information with it. Is there a link somewhere I can get information.
    • 0


  9. Snipe added a post in a topic Luga NR prop selection   

    and then there’s Kool props. Roman says mine is being shipped on Monday. Can’t wait
    • 0


  10. Snipe added a post in a topic Luga NR prop selection   

    I am looking forward to getting mine.
    • 0


  11. Snipe added a post in a topic Not a crash, but still a dumb stunt   

    apparently the sharks have better heaters in their private jets so they figured there’s no need for warm clothing.
    • 3


  12. Snipe added a post in a topic Snow and no snow   

    Nice country you live in. Love that real smoooth snow you got up there.
    • 0


  13. Snipe added a post in a topic Mn heat wave   

    Just went out to plug-in auger and fire up semi and it feels like summer at a balmy 1 degree Fahrenheit. Still dark and birds are chirping and coyotes making a racket so I am not the only one enjoying the warm weather.
    • 0


  14. Snipe added a post in a topic Heated Seat   

    I hear you on recharging...there is way to many things to recharge daily.
    • 0


  15. Snipe added a post in a topic Heated Seat   

    Those electric seat heaters sound like a good idea. Has anyone tried out those Milwaukee electric jackets? They should keep you warm before and after the flight also. 
    • 0


  16. Snipe added a post in a topic Heated Seat   

    912UL
    • 0


  17. Snipe added a post in a topic Heated Seat   

    I use a exhaust muff for heat it puts out plenty of warm air. At -5F cockpit is comfortable in a sweat shirt jeans long Jon’s and bare hands. Doors seal up tight and I fly with vents open. I preheat cockpit and engine before flight so it’s warm right off the start. I could fly in colder temps but if I don’t have to go I don’t. -47 with wind chill here this morning and a 172 was out flying pipelines when the sun started to shine. 
    • 0


  18. Snipe added a post in a topic Heated Seat   

    How cold of weather are you guys flying in? I usually draw the line at -5F. Cockpit is toasty at those temps. It’s been hovering around -30 to -40 this week so in hibernation at the moment.
    • 0


  19. Snipe added a post in a topic Merlin GT   

    I have been planning to fly back to winters to meet up with Andy but weather and flu has put a hold on it. Dirks Merlin is 60 miles east of me also.
    • 0


  20. Snipe added a post in a topic Luga NR prop selection   

    I am hoping it works if it’s to much I will use it as a two blade. The fellow That ordered it for me said he has tried about 30 props on his Rans and said better performance with a schmitar blade was with a blade longer than what Roman recommended especially on a slow fat wing plane If It was for a speedy RV his recommendation would be spot on. Roman recommended a 72 inch two blade Jason thought 76. I will post the results here when it arrives. 1avid I think you will love that Luga from what I remember from long conversation is the prop I am using was at the bottom of the barrel for performance warp was one from the bottom. There was a real skinny multi blade prop he mentioned that has great potential but long enough blades for the power he is developing weren’t available then.
    • 0


  21. Snipe added a post in a topic Rotax 912 ULS Tuned Intake   

    I wish I had the room to make one of these work on my Merlin so I could incorporate carb heat and if it increased performance that would be a plus. This winter has been bad for high humidity always less than a 2 degree dew point spread causing carb ice twice. Engine runs fine at cruise but when you remove some throttle it feels like you lost a blade off the prop. 
    • 0


  22. Snipe added a post in a topic Luga NR prop selection   

    It will be ordered today. The engine builder from Alberta that is bringing it in for me strongly recommend the R107 schmitar 3 blade for my 80 hp 912 he has a 2 blade hub that I can use also to compare. The only thing that could go wrong is I will be underpowered and I will have to explain to my other half that I need a 912 ULS or a new Edge125hp to spin my prop
    • 0


  23. Snipe added a post in a topic Merlin GT   



  24. Snipe added a post in a topic Merlin GT   

    While at Oshkosh I ran across a new plane called the Mule which resembles the Merlin E-Z. This Mule is a updated Merlin the owner worked at Merlin for a bit and actually help build mine. gairplanes.com 
    • 0


  25. Snipe added a post in a topic Luga NR prop selection   

    Thanks 1avid I think I will lean towards sr106 two blade. 
    • 1